alex996

OK, tried Armbian_5.38_Odroidxu4_Ubuntu_xenial_next_4.14.15 from archive/wrongf, gave me same errors as Armbian 5.37 with Kernel 4.9: with ADATA SP550 no device found. debug: http://ix.io/Xae

Whats about the "wrongf" branch in https://dl.armbian.com/odroidxu4/archive/ ? I'll give it a try. So ganz nebenbei: Danke für deine Hilfe. Ich nehme an auf Deutsch unterhalten ist hier nicht gern gesehen?

debug output: http://ix.io/X7A (hope it's verbose enough, dont know how to set verbosity_level, there seems to be no armbianEnv.txt in /boot ).

I did, 5.14V directly at SATA-Connector. Just installed original Odroid Ubuntu 16.04.3 LTS with 4.14 kernel and my ADATA works! Kernel issue?

UPDATE: I've tried another SSD (WD Green, 120GB) which seems to work without problems. Only a little bit too small... Are there any known issues with HC1+Armbian+ADATA? I did the FW-update mentioned at https://wiki.odroid.com/odroid-xu4/software/jms578_fw_update (with WD-Green attached), but after switching back to the ADATA SP550 dmesg shows this two messages over and over again: [ 559.347071] scsi 0:0:0:1: tag#0 sense submit err -19 uas-tag 1 inflight: s-st a-in s-in a-cmd s-cmd [ 559.347077] scsi 0:0:0:1: tag#0 CDB: opcode=0x12 12 00 00 00 24 00 ... And CPU-Load is ~12%, wtih nothing running. Replacing the ADATA with the WD-Green and everything is ok again.

Hi, just bought a HC1 and tryin to setup Armbian. I installed Armbian_5.37_Odroidxu4_Ubuntu_xenial_next_4.9.71, works with SDHC. Now I put in my ADATA SP550 (480GB) SSD, but something fails, see dmesg: There is no device for the SSD, therefor no installation to SATA possible. Any suggestions?? Power is ok (5V, 4A), SSD works fine on my desktop, without any hassles.