Thanks for the Kernel parameter. It works nearly perfect, but I am missing one interface:
lan1@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noqueue state DOWN group default qlen 1000 link/ether 00:50:43:84:25:2f brd ff:ff:ff:ff:ff:ff
lan2@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noqueue state DOWN group default qlen 1000 link/ether 00:50:43:84:25:2f brd ff:ff:ff:ff:ff:ff
lan3@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noqueue state DOWN group default qlen 1000 link/ether 00:50:43:84:25:2f brd ff:ff:ff:ff:ff:ff
lan4@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noqueue state DOWN group default qlen 1000 link/ether 00:50:43:84:25:2f brd ff:ff:ff:ff:ff:ff
lan5@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noqueue state DOWN group default qlen 1000 link/ether 00:50:43:84:25:2f brd ff:ff:ff:ff:ff:ff
During bootstrap, it shows:
dsa dsa@0 lan6 (uninitialized): no phy at 6
dsa dsa@0 lan6 (uninitialized): failed to connect to port 6: -19
mvneta f1030000.ethernet eth0: error -19 setting up slave phy
mvneta f1030000.ethernet eth0: [0]: can't create dsa slave device for port 6(lan6): -19
Current configuration: Kernel 4.4.5 with Quintus' 2.5Gbit patch for the SFP.
Accessible ports: