Bangliang Shen

Members
  • Content Count

    7
  • Joined

  • Last visited

About Bangliang Shen

  • Rank
    Newbie

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I have this board from Android advertising dashboard and want to install Armbian inside this device anyone knows howto? which image to choose from?
  2. I am using a Phicomm N1 Armbian runs well on it. CPU: Amlogic S905D, ARM Cortex-A53, Quad Core 2GHz GPU: ARM Mali™-450, 4K@60fps Hardware acceleration support, HDMI 2.0 RAM: K4B4G1646E, DDR3-1866MHz 512MB*4=2GB ROM: KLM8G1GEME, 8GB eMMC Port: 1*HDMI 2.0; 2*USB2.0; 1*Gigabit Ethernet Power Adapter: Input 110-240V~50/60Hz AC; Output 12V/2A DC Ethernet: RTL8211F Gigabit Ethernet WIFI/Bluetooth: CYW43455 (same as Raspberry Pi 3B+) 2.4G/5G WiFi IEEE 802.11n/ac with Integrated Bluetooth 4.1 and a Phicomm T1 CPU: Amlogic S912, ARM Cortex-A53, Octa Core 1.5GHz GPU: ARM Mali™-820, 4K UHD, DOLBY H.265(HEVC) RAM: 2GB ROM: 16GB eMMC Port: 1*HDMI 2.0; 1*USB2.0; 100m Ethernet Power Adapter: Input 110-240V~50/60Hz AC; Output 5V/2A DC WIFI/Bluetooth: 2.4G/5G WiFi IEEE 802.11n/ac with Integrated Bluetooth 4.1 【Remark: I cannot find a specified DTB file for this device】 and there is another device to recommend. ZTE9 FunBox. I hope this box will be supported by Armbian Linux. The FunBox is powered by NVIDIA’s Tegra4 processor, based on the A15 architecture, and the superior graphics performance is delivered by a 72-core GeForce graphics processor with 2GB DDR3L memory and 8GB of Flash memory. The specifications make the FunBox the highest performance home entertainment console in 2014.
  3. Thank You. I am also a member of Right.com.cn; N1 device is very popular here. It is much better than Pi 3.
  4. Yes I read this on the power adaptor it says Output 12V/2A and the adaptor size is even smaller than those of Netgear routers. This is a really cool device!
  5. hI balbes150, Do you know which is the perfect edition of Armbian Linux to below device? this is a popular device in the forum for Armbian Linux in CHINA. However its wifi and the Bluetooth driver is not working good right now, and the wireless lost connection occasionally without any noticed reason. Hardware NAME: Phicomm N1 CPU: Amlogic S905D, ARM Cortex-A53, Quad Core 2GHz GPU: ARM Mali™-450, 4K@60fps Hardware acceleration support, HDMI 2.0 RAM: K4B4G1646E, DDR3-1866MHz 512MB*4=2GB ROM: KLM8G1GEME, 8GB eMMC Port: 1*HDMI 2.0; 2*USB2.0; 1*Gigabit Ethernet Power Adapter: Input 110-240V~50/60Hz AC; Output 12V/2A DC Ethernet(LAN): RTL8211F Gigabit Ethernet WIFI/Bluetooth: CYW43455 (same as Raspberry Pi 3B+) 2.4G/5G WiFi IEEE 802.11n/ac with Integrated Bluetooth 4.1 Wireless Datasheet: http://www.cypress.com/documentation/datasheets/cyw43455-single-chip-5g-wifi-ieee-80211nac-macbaseband-radio-integrated
  6. @guidol I am trying to upload Phicomm N1 to my eBay shop. But its postage is higher than the device itself. I can say it is bloody cheap. Just 30usd/set plus shipping charges from China to worldwide. 7*7*3 Inch in size, less than 2 lb. I think the shipping charges will be 40usd by FedEx to the USA. Hardware: CPU: Amlogic S905D, ARM Cortex-A53, Quad Core 2GHz GPU: ARM Mali™-450, 4K@60fps Hardware acceleration support, HDMI 2.0 RAM: K4B4G1646E, DDR3-1866MHz 512MB*4=2GB ROM: KLM8G1GEME, 8GB eMMC Port: 1*HDMI 2.0; 2*USB2.0; 1*Gigabit Ethernet Power Adapter: Input 110-240V~50/60Hz AC; Output 12V/2A DC Ethernet(LAN): RTL8211F Gigabit Ethernet WIFI/Bluetooth: CYW43455 (same as Raspberry Pi 3B+) 2.4G/5G WiFi IEEE 802.11n/ac with Integrated Bluetooth 4.1 Wireless Datasheet: http://www.cypress.com/documentation/datasheets/cyw43455-single-chip-5g-wifi-ieee-80211nac-macbaseband-radio-integrated
  7. Hellow there, I installed Armbian_5.67_Aml-s9xxx_Ubuntu_bionic_default_4.19.0-rc7_desktop_20181117 to my Phicomm N1 box and found that the WIFI/Bluetooth is not available. Anyone can help me install the drivers? ____ ___ / ___|/ _ \__ ____ ____ __ \___ \ (_) \ \/ /\ \/ /\ \/ / ___) \__, |> < > < > < |____/ /_//_/\_\/_/\_\/_/\_\ Welcome to ARMBIAN 5.67 user-built Ubuntu 18.04.1 LTS 4.19.0-rc7-aml-s9xxx System load: 2.45 1.19 0.57 Up time: 9 min Memory usage: 16 % of 1844MB IP: 192.168.9.46 CPU temp: 49°C Usage of /: 9% of 29G storage/: 51% of 128M [ General system configuration (beta): armbian-config ] Last login: Wed Nov 28 12:14:46 2018 hardware info: CPU: Amlogic S905D RAM: 2G DDR3 8G eMMC Ethernet: RTL8211F Gigabit Ethernet WIFI/Bluetooth: CYW43455 ( same as Raspberry Pi 3B+ ) 5G WiFi IEEE 802.11n/ac with Integrated Bluetooth 4.1 Datasheet http://www.cypress.com/documentation/datasheets/cyw43455-single-chip-5g-wifi-ieee-80211nac-macbaseband-radio-integrated