Dear all
I am using BPI-M3 this board
I got some questions
first
I can't use Uart other than Debug Uart (maybe Uart1 or Uart2)
Debug Uart can call /dev/ttyS0 use it
i don't know how to driver /dev/ttyS1~7
so GPIO header pin 8 /10 only have normal GPIO features
and
i install Armbian_5.55_Bananapim3_Debian_stretch_next_4.17.12
i try to use WiringPI control my GPIO pin is can be work
[git clone https://github.com/BPI-SINOVOIP/BPI-WiringPi.git -b BPI_M3]
but now
i install Armbian_5.59.180823_Bananapim3_Debian_stretch_dev_4.18.4 and
Armbian_5.59_Bananapim3_Debian_stretch_dev_4.18.5
install WiringPi and WiringPi2
can't Work for this Version
====
gpio version: 2.26
Copyright (c) 2012-2015 Gordon Henderson
This is free software with ABSOLUTELY NO WARRANTY.
For details type: gpio -warranty
Unable to determine hardware version. I see: Hardware : Allwinner A83t board
,
- expecting BCM2708 or BCM2709. Please report this to projects@drogon.net
====
gpio version: 2.44
Copyright (c) 2012-2017 Gordon Henderson
This is free software with ABSOLUTELY NO WARRANTY.
For details type: gpio -warranty
Unable to determine hardware version. I see: Hardware : Allwinner A83t board
,
- expecting BCM2708, BCM2709 or BCM2835.
If this is a genuine Raspberry Pi then please report this
to projects@drogon.net. If this is not a Raspberry Pi then you
are on your own as wiringPi is designed to support the
Raspberry Pi ONLY.
====
why ?
I need some answers about these
thank for all!