Search the Community
Showing results for tags 'nanopineo3'.
-
I have a nanopi neo3 rk3328. I would like to modify the i2s(1) at start. I tried to modify /boot/dtb/rockchip/rk3328-nanopi-neo3-rev02.dtb but nothing change. Which is the right dtb file its load at start? Thank you.
-
I got the following error message when I try to install firmware-misc-nonfree_20190114-2_all.deb from the upstream debian repository. ... Get:1 http://deb.debian.org/debian buster/non-free arm64 firmware-misc-nonfree all 20190114-2 [3,338 kB] Fetched 3,338 kB in 1s (4,022 kB/s) Selecting previously unselected package firmware-misc-nonfree. (Reading database ... 77206 files and directories currently installed.) Preparing to unpack .../firmware-misc-nonfree_20190114-2_all.deb ... Unpacking firmware-misc-nonfree (20190114-2) ... dpkg: error processing archive /var/cache/apt/archives/firmware-misc-nonfree_20190114-2_all.deb (--unpack): trying to overwrite '/lib/firmware/dvb-fe-xc5000-1.6.114.fw', which is also in package armbian-firmware 21.02.2 d ... So it seems, there is the same firmware package in different packages...but idea, because armbian-firmware 21.02.2 miss the mt7* firmware, which is required to use the wifi expansion module of the nanopi neo3. So, I think the pakcage mantainer should resolve this issue. -
hi, I am running newest armbian for NEO3. I've noticed that when I issue poweroff command armbian shuts down correctly, but the CPU (with heatsink) remains hot. I left my board for 2 days in poweroff state and it remained 'warm' all the time. Is there something that can be done to put CPU to sleep before shutting down system (or some low power state) ?
-
Hello, When I comment device via USB 3.0 I see it: ender3@ender3:~$ lsusb Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 004 Device 002: ID 1d50:614e OpenMoko, Inc. Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub However with pins GND, DP1, DM1, +5V Bus 005 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub See Layout / USB2.0 - https://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO3 Any ideas how I should activate these pins? Want to connect 3d printer and endoscope OTG camera that works with RPi, so should be matter of drivers. Testing on printer now. Also, if it is not supported, may I use simple USB 2.0 hub to connect to USB 3.0 port WiFI card, 3d printer and OTG endoscope camera? Prefer to activate these pins if I may to choose : )
-
Hi I try ro install and use Armbian on my NanoPi NEO 3. But when I do a first boot, I stuck at Generate Locale step. How can I fix it? Thank you very much. .
-
I'm trying to make boot a NanoPi Neo3 from SSD connected through USB. - I installed armbian Buster 5.8.6 downloaded from armbian.com - Next, I tried with and without apt update - connected an external SSD through the USB port and and a USB 3.0->SATA box - Executed nand-sata-install and selected the option to boot from external SSD - The system prepared the SSD, copied filesystem, modified boot (and I verified that in armbianExt.txt it set the UUID of the external disk) - rebooted ... And nothing I've observed that the system not always detects the external SSD. I must unplug and plug it to be recognized (as /dev/sda btw). Perhaps this is part of the problem. Does anyone have any idea on what happens and how can I solve it?
-
HI I just bought 2 neo3 and started with Armbian and the MAC address is the same. But using the official image is a different MAC address.How can I use Armbian so that neo3 has the correct unique MAC address? I use cmd xxd / sys / bus / nvmem / devices / rockchip-efuse0 / nvmem I get the same value. -
I manged to get the USB OTG headers working on the NEO3 by modifying the NanoPi R2S DTB that it is currently using. 2 changes were needed: - Replaced all usb2 references to usb0 - Changed dr_mode for usb@ff580000 from otg to peripheral Modified DTB file attached if anyone else wants to give this a try or has a need for OTG on the NEO3 rk3328-nanopi-neo3-rev00.dtb
-
/usr/bin/brcm_patchram_plus/rk3399 hogs 100% CPU until rk3399-bluetooth.service is stopped and disabled. The NanoPi Neo3 does not have bluetooth.
