Search the Community

6 days ago I did a usual "apt-get update && apt-get upgrade" which brought up the following output: rock@rock-3a:~$ sudo apt-get update && sudo apt-get upgrade && sudo apt-get -y autoremove && sudo apt-get -y autoclean OK:1 http://deb.debian.org/debian bullseye InRelease OK:2 http://deb.debian.org/debian bullseye-updates InRelease OK:3 http://security.debian.org bullseye-security InRelease OK:5 http://deb.debian.org/debian bullseye-backports InRelease OK:4 https://box64.debian.ryanfortner.dev/debian ./ InRelease OK:6 https://mirror-eu-de1.armbian.airframes.io/apt bullseye InRelease Paketlisten werden gelesen… Fertig Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Paketaktualisierung (Upgrade) wird berechnet… Fertig Die folgenden Pakete werden aktualisiert (Upgrade): armbian-bsp-cli-rock-3a armbian-config armbian-firmware armbian-zsh linux-dtb-edge-rk35xx linux-image-edge-rk35xx linux-libc-dev linux-u-boot-rock-3a-edge tzdata 9 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Es müssen noch 68,7 MB von 68,9 MB an Archiven heruntergeladen werden. Nach dieser Operation werden 304 kB Plattenplatz zusätzlich benutzt. Möchten Sie fortfahren? [J/n] Holen:1 https://mirror-eu-de1.armbian.airframes.io/apt bullseye/main arm64 armbian-bsp-cli-rock-3a arm64 22.08.4 [423 kB] Holen:2 https://mirror-eu-de1.armbian.airframes.io/apt bullseye/main arm64 armbian-config all 22.08.4 [128 kB] Holen:3 https://mirror-eu-de1.armbian.airframes.io/apt bullseye/main arm64 armbian-firmware all 22.08.4 [9.408 kB] Holen:4 https://mirror-eu-de1.armbian.airframes.io/apt bullseye/main arm64 armbian-zsh all 22.08.4 [2.302 kB] Holen:5 https://mirror-eu-de1.armbian.airframes.io/apt bullseye/main arm64 linux-dtb-edge-rk35xx arm64 22.08.4 [450 kB] Holen:6 https://mirror-eu-de1.armbian.airframes.io/apt bullseye/main arm64 linux-image-edge-rk35xx arm64 22.08.4 [53,7 MB] Holen:7 https://mirror-eu-de1.armbian.airframes.io/apt bullseye/main arm64 linux-libc-dev arm64 22.08.4 [1.233 kB] Holen:8 https://mirror-eu-de1.armbian.airframes.io/apt bullseye/main arm64 linux-u-boot-rock-3a-edge arm64 22.08.4 [1.033 kB] Es wurden 68,7 MB in 11 s geholt (6.301 kB/s). Preconfiguring packages ... (Lese Datenbank ... 47489 Dateien und Verzeichnisse sind derzeit installiert.) Vorbereitung zum Entpacken von .../0-tzdata_2021a-1+deb11u7_all.deb ... Entpacken von tzdata (2021a-1+deb11u7) über (2021a-1+deb11u6) ... Vorbereitung zum Entpacken von .../1-armbian-bsp-cli-rock-3a_22.08.4_arm64.deb ... Entpacken von armbian-bsp-cli-rock-3a (22.08.4) über (22.08.2) ... Vorbereitung zum Entpacken von .../2-armbian-config_22.08.4_all.deb ... Entpacken von armbian-config (22.08.4) über (22.08.2) ... Vorbereitung zum Entpacken von .../3-armbian-firmware_22.08.4_all.deb ... Entpacken von armbian-firmware (22.08.4) über (22.08.2) ... Vorbereitung zum Entpacken von .../4-armbian-zsh_22.08.4_all.deb ... Entpacken von armbian-zsh (22.08.4) über (22.08.2) ... Vorbereitung zum Entpacken von .../5-linux-dtb-edge-rk35xx_22.08.4_arm64.deb ... Entpacken von linux-dtb-edge-rk35xx (22.08.4) über (22.08.2) ... Vorbereitung zum Entpacken von .../6-linux-image-edge-rk35xx_22.08.4_arm64.deb ... Entpacken von linux-image-edge-rk35xx (22.08.4) über (22.08.2) ... Vorbereitung zum Entpacken von .../7-linux-libc-dev_22.08.4_arm64.deb ... Entpacken von linux-libc-dev:arm64 (22.08.4) über (22.08.2) ... Vorbereitung zum Entpacken von .../8-linux-u-boot-rock-3a-edge_22.08.4_arm64.deb ... Entpacken von linux-u-boot-rock-3a-edge (22.08.4) über (22.08.2) ... linux-libc-dev:arm64 (22.08.4) wird eingerichtet ... linux-dtb-edge-rk35xx (22.08.4) wird eingerichtet ... armbian-zsh (22.08.4) wird eingerichtet ... tzdata (2021a-1+deb11u7) wird eingerichtet ... Current default time zone: 'Europe/Berlin' Local time is now: Sun Oct 16 21:23:09 CEST 2022. Universal Time is now: Sun Oct 16 19:23:09 UTC 2022. Run 'dpkg-reconfigure tzdata' if you wish to change it. armbian-config (22.08.4) wird eingerichtet ... armbian-bsp-cli-rock-3a (22.08.4) wird eingerichtet ... armbian-firmware (22.08.4) wird eingerichtet ... linux-image-edge-rk35xx (22.08.4) wird eingerichtet ... dkms: running auto installation service for kernel 5.19.14-rk35xx:. update-initramfs: Generating /boot/initrd.img-5.19.14-rk35xx update-initramfs: Converting to u-boot format Remove unused generated file: /boot/uInitrd-5.19.10-rk35xx Remove unused generated file: /boot/initrd.img-5.19.10-rk35xx linux-u-boot-rock-3a-edge (22.08.4) wird eingerichtet ... Trigger für initramfs-tools (0.140) werden verarbeitet ... update-initramfs: Generating /boot/initrd.img-5.19.14-rk35xx update-initramfs: Converting to u-boot format Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig 0 aktualisiert, 0 neu installiert, 0 zu entfernen und 0 nicht aktualisiert. Paketlisten werden gelesen… Fertig Abhängigkeitsbaum wird aufgebaut… Fertig Statusinformationen werden eingelesen… Fertig Del tzdata 2021a-1+deb11u6 [284 kB] rock@rock-3a:~$ After a reboot the USB port bus 007:device 002 on with an Arduino Nano connected rock@rock-3a:~$ lsusb >>> Bus 007 Device 002: ID 2341:0043 Arduino SA Uno R3 (CDC ACM) <<< Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub does not show up anymore as '/dev/ttyACM0' ! Although the device does exist: rock@rock-3a:~$ ll /dev/bus/usb/007/002 0 crw-rw-r-- 1 root root 189, 769 22. Okt 12:40 /dev/bus/usb/007/002 And therefore is no more accessible. Multiple reboots did not resolve the problem. What to do now? I do appreciate any idea 🙂 Thx for helping!

Whats the SSH password? i plugged it in and can see the device grab an IP but the default username "pi" and password "armbian" does not work when attempting to ssh in.

Hello everyone, I am beginner to ARMBIAN OS installed on Rock 3A ( 4/64 GB) board. Version of the Armbian OS is "Armbian_22.08.1_Rock-3a_jammy_edge_5.19.5_xfce_desktop.img.xz" and I'm trying to install basic radxa packages such as mraa, PoE function, etc. But I don't know how to and where to update the radxa repository on armbian os. Still I try to update the repository on /etc/apt/source.list.d/armbian.list , but while updating (apt update) it's throwing an error like "An error occurred during the signature verification". Please help me to solve this issue. Note : The motive is I have to work with PoE hat, for that mraa packages are essentials. And also I need to work with UART's and please let me know how to add those uarts on overlays of armbianEnv.txt. Kindly let me know ASAP. Thanks !

All armbian images with 5.x kernel are not working for me. I found working variant of 5.x kernel here - https://github.com/qxhome/rk3568-kernel5.10-alldrivers but it have problems with firewall and docker Does anybody have other variants?

Hey there, had anyone any success enabling PWM to control a PoE hat [1]? I tried a few overlays but no luck. ``` rock-3a-worker-1:overlay:# cat /boot/armbianEnv.txt verbosity=1 bootlogo=false overlay_prefix=rk35xx fdtfile=rockchip/rk3568-rock-3a.dtb rootdev=UUID=f0751d3c-c5c2-4ced-a989-772c2ad130a4 rootfstype=ext4 overlays=w1-gpio i2c7 i2c8 extraboardargs=nvme_core.default_ps_max_latency_us=0 usbstoragequirks=0x2537:0x1066:u,0x2537:0x1068:u ``` I also built mraa with the following: ``` IMRAA=ON FTDI4222=OFF BUILDCPP=ON BUILDTESTS=ON BUILDSWIG=ON USBPLAT=ON ONEWIRE=ON INSTALLTOOLS=ON BUILDSWIGPYTHON=ON \ bash -c "./scripts/run-cmake.sh && make -Cbuild install" ``` but it won't show anything on gpio or pwm ``` mraa-gpio list No Pins ``` Any other ideas there? [1] Pinout -> https://wiki.radxa.com/ROCKPI_23W_PoE_HAT

Hi Is it possible to install the system on NMVE M2 ? Or how to completely transfer the SD card OS to NMVEIs it possible to install the system on NMVE M2 ?

rock@rock-3a:~$ dmesg |grep spi [ 6.279244] spi-nor spi4.0: unrecognized JEDEC id bytes: 00 00 00 00 00 00 [ 6.279275] spi-nor: probe of spi4.0 failed with error -2 the armbianEnv is as below. verbosity=1 bootlogo=false extraargs=systemd.unified_cgroup_hierarchy=0 overlay_prefix=rk35xx fdtfile=rockchip/rk3568-rock-3a.dtb rootdev=UUID=6359cdcb-b9a7-4930-9257-30f4e34b0a4f rootfstype=ext4 overlays=spi-spidev param_spidev_spi_bus=0 param_spidev_spi_cs=0 param_spidev_max_freq=40000000 Is there anyone know which version is ok for Rock 3a or rock p;i 4b?