Search the Community

Test version of images 20230622-legacy for star64. https://disk.yandex.ru/d/eEC4riP1jBWCeg Important. For the system to work correctly, you need to update the bootloader once. To do this, download the image from the link https://disk.yandex.ru/d/zsqznfa1ySI2gw burn it to the SD card, connect it to Star64 and turn on the power, wait 2 minutes and turn off the power. After that, you can write an ArmbianTV image to the SD card, connect it to Star64 and the system will start automatically. The next steps are usually the initial setup of Armbian. In versions with DE (IceWM XFCE). even video playback in the window works (fullscreen mode does not work) through the Parole player. Analog audio output is enabled by default, to switch to HDMI audio, use the settings via Volume Control as usual. root@192.168.1.51's password: ____ _ __ _ _ / ___|| |_ __ _ _ __ / /_ | || | \___ \| __/ _` | '__| '_ \| || |_ ___) | || (_| | | | (_) |__ _| |____/ \__\__,_|_| \___/ |_| Welcome to Armbian 23.06 Jammy with Linux 5.15.115-star64 System load: 3% Up time: 3 min Memory usage: 3% of 3.80G IP: 192.168.1.51 CPU temp: 39°C Usage of /: 17% of 7.1G RX today: 19.4 KiB [ 10 security updates available, 12 updates total: apt upgrade ] Last check: 2023-06-22 12:32 [ General system configuration (beta): armbian-config ] Last login: Thu Jun 22 12:32:24 2023 root@star64:~# cat /proc/cpuinfo processor : 0 hart : 1 isa : rv64imafdc mmu : sv39 isa-ext : uarch : sifive,u74-mc processor : 1 hart : 2 isa : rv64imafdc mmu : sv39 isa-ext : uarch : sifive,u74-mc processor : 2 hart : 3 isa : rv64imafdc mmu : sv39 isa-ext : uarch : sifive,u74-mc processor : 3 hart : 4 isa : rv64imafdc mmu : sv39 isa-ext : uarch : sifive,u74-mc root@star64:~# neofetch .-/+oossssoo+/-. root@star64 `:+ssssssssssssssssss+:` ----------- -+ssssssssssssssssssyyssss+- OS: Ubuntu 22.04.2 LTS riscv64 .ossssssssssssssssssdMMMNysssso. Host: Pine64 Star64 /ssssssssssshdmmNNmmyNMMMMhssssss/ Kernel: 5.15.115-star64 +ssssssssshmydMMMMMMMNddddyssssssss+ Uptime: 4 mins /sssssssshNMMMyhhyyyyhmNMMMNhssssssss/ Packages: 509 (dpkg) .ssssssssdMMMNhsssssssssshNMMMdssssssss. Shell: bash 5.1.16 +sssshhhyNMMNyssssssssssssyNMMMysssssss+ Resolution: 1920x1080 ossyNMMMNyMMhsssssssssssssshmmmhssssssso Terminal: /dev/pts/0 ossyNMMMNyMMhsssssssssssssshmmmhssssssso CPU: (4) @ 1.500GHz +sssshhhyNMMNyssssssssssssyNMMMysssssss+ Memory: 118MiB / 3893MiB .ssssssssdMMMNhsssssssssshNMMMdssssssss. /sssssssshNMMMyhhyyyyhdNMMMNhssssssss/ +sssssssssdmydMMMMMMMMddddyssssssss+ /ssssssssssshdmNNNNmyNMMMMhssssss/ .ossssssssssssssssssdMMMNysssso. -+sssssssssssssssssyyyssss+- `:+ssssssssssssssssss+:` .-/+oossssoo+/-. root@star64:~#

Finally was able to boot from: Armbian_23.09_Starfive2_lunar_current_6.1.31.img.xz Which is from https://disk.yandex.ru/d/YDBZD53WnCk1Ig/ArmbianTV/20231123-current So the board works, but there seems to be no USB support? I tried to boot from the image from the Armbian site https://www.armbian.com/star64/ But it will not boot at all. What am I doing wrong?