Cubox-i: Armbian Jessie Vanilla no sound from SPDIF

[RBM]

Hi there,

 

Just loaded Armbian Vanilla Jessie (5.00, 4.4.1 kernel) on one of my Cuboxes. There's no sound from SPDIF, even though it's seen:

 

root@cubox-i:~# aplay -l

**** List of PLAYBACK Hardware Devices ****

card 0: SPDIF [integrated SPDIF], device 0: S/PDIF PCM snd-soc-dummy-dai-0 []

  Subdevices: 1/1

  Subdevice #0: subdevice #0

 

Speaker-test shows no errors:

 

root@cubox-i:~# speaker-test -r 44100 -F S16_LE -c 2 -D hw:0,0

 

speaker-test 1.0.28

 

Playback device is hw:0,0

Stream parameters are 44100Hz, S16_LE, 2 channels

Using 16 octaves of pink noise

Rate set to 44100Hz (requested 44100Hz)

Buffer size range from 64 to 16384

Period size range from 32 to 8192

Using max buffer size 16384

Periods = 4

was set period_size = 4096

was set buffer_size = 16384

 0 - Front Left

 1 - Front Right

Time per period = 5.607037

 0 - Front Left

 1 - Front Right

 

It all appears to work – except for the actual sound coming out. Tried with 2 different Cuboxes. Armbian Legacy (3.14.60) outputs sound OK.

 

Any ideas?