Jaroslav Posted October 1, 2019 Share Posted October 1, 2019 (edited) Hello, is booting SPI + NVME supported on RockPro64? If I use armbian-config and installing system SPI + NVME will not boot the system. When using SD (mmc) + NVME is OK. SPI + USB also OK. Thank you for your help. Edited October 1, 2019 by Jaroslav Link to comment Share on other sites More sharing options...
Rampouch Posted December 28, 2019 Share Posted December 28, 2019 Ahoj Jardo, povedlo se ti donutit system aby nabootoval z NVME disku, bez přítomnosti SD nebo EMMC ? Díky, Petr Link to comment Share on other sites More sharing options...
piter75 Posted December 28, 2019 Share Posted December 28, 2019 AFAIK there is currently no driver for Rockchip's PCIE controller in u-boot and that's why booting from SPI/NVMe does not work. There is some work by Radxa in their own fork of Rockchip's u-boot but the support for booting from NVMe is still limited at the moment: https://wiki.radxa.com/Rockpi4/FAQs#What_M.2_SSD_are_supported.3F Link to comment Share on other sites More sharing options...
Recommended Posts