sgjava Posted February 22, 2020 Share Posted February 22, 2020 I've installed a wireless alarm system, but I want to use all my old wired stuff from my original alarm system. I started down the road of using an ESP8266, but GPIO.INT was flaky and GPIO pins limited, so I ordered a MCP23017 and figured Why not just do everything with one NanoPi Duo? I have a few of them and they are made for breadboard prototyping. Plus with the built in Ethernet I can have wired primary and wireless backup networking. I even rolled my own Ethernet adapter since the breakout adapters cost $5+. If you have already done this and have any wisdom to share I'd like to hear it. No turning back now! Link to comment Share on other sites More sharing options...
Recommended Posts