1 1
rauscharm

Android

Recommended Posts

Hello everybody,

the images from armbian for my Orange Pi 3 work very fine and stable.

Thank you for that.

 

I came to armbian by links form orangepi.org.

When I tried to get an Android image from there I got
an Xutuntu image. (https://drive.google.com/drive/folders/1Urh9-yljq9Mrrafp7ZWRVf_s_AdjUoTQ)

 

Do you know where to get an Android for my Orange Pi 3?

 

Thanks if you have information for me about that.

 

 

 

 

Share this post


Link to post
Share on other sites
Armbian is a community driven open source project. Do you like to contribute your code?

You can download board specific images from :

http://www.orangepi.org/downloadresources/

Also if you only need the Android Image, you can download the official orange pi build from :

https://drive.google.com/drive/mobile/folders/1Urh9-yljq9Mrrafp7ZWRVf_s_AdjUoTQ?usp=drive_open

EDIT:

Are sure you used the correct file?

The image provided by the link you mentioned, is 383 Mb, and no other orange pi's official linux image has a size equal to that

So go double check the file you used/extracted

:)

 

Share this post


Link to post
Share on other sites
(edited)
On 3/30/2020 at 2:11 PM, rauscharm said:

Hello everybody,

the images from armbian for my Orange Pi 3 work very fine and stable.

Thank you for that.

 

I came to armbian by links form orangepi.org.

When I tried to get an Android image from there I got
an Xutuntu image. (https://drive.google.com/drive/folders/1Urh9-yljq9Mrrafp7ZWRVf_s_AdjUoTQ)

 

Do you know where to get an Android for my Orange Pi 3?

 

Thanks if you have information for me about that.

 

 

 

 

Also, note that OrangePi Android images cannot be flashed to microsd cards with a simple Etcher or WinImager (or whatever it was called). You need to use PhoenixCard v4.1.2 I'll type that out again; 4.1.2. I know, google tells you that the latest version of PhoenixCard is 3.1.x, but you can find the 4.1.2 from orangepi's site somewhere, I forgot exactly where. At least for me, the 3.1.x did NOT work at all. Once I found the v4.1.2 everything worked. 

Edited by Anna Vahtera
typo

Share this post


Link to post
Share on other sites

Hi,

thanks for your reply.

I found 2 PhoenixCard V4.1.2. When open them, I can see buttons but they are blank.

grafik.png.a8ad5d2f3932359d499f202702cf9fde.png

It's on Windows 10. I also tried it on a Windows 10 in a virtual machine both had the same appearance with most of nothing. :-)

How can you use it?

 

P.S. the Xubuntu that started was from emmc, as I think the pi did not boot the "Andriod Card" so first I thought I burned the wrong image.

 

 

Share this post


Link to post
Share on other sites

I got the PhoenixCard v4.1.2 straight from OrangePi.org, from their download folders, here: https://drive.google.com/drive/folders/1Vh2H14q9GDyfTdepVOIfAlrVjVZ_FM2A

I'm using Windows 10 too and I didn't have any problems with it.  I don't know if it needs the latest dotNET or no, but might be worth to see if both 3.x and 4.x are of the latest version.

 

Other than that, I can't really help since it's working on my computer without problems.

Share this post


Link to post
Share on other sites
On 3/31/2020 at 2:08 AM, Localhost said:

You can download board specific images from :

http://www.orangepi.org/downloadresources/

Also if you only need the Android Image, you can download the official orange pi build from :

https://drive.google.com/drive/mobile/folders/1Urh9-yljq9Mrrafp7ZWRVf_s_AdjUoTQ?usp=drive_open

EDIT:

Are sure you used the correct file?

The image provided by the link you mentioned, is 383 Mb, and no other orange pi's official linux image has a size equal to that

So go double check the file you used/extracted

:)

 

 

I can install the Android 7 on Orange Pi 3 but there are no google store, and everytime i try to run Netflix/Youtube or other program, it said

 

 

23ace6625646ac18f557.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
1 1