smiles Posted July 17, 2022 Share Posted July 17, 2022 I flashed my espressobin v5 with flash-image-DDR4-1g_1cs_5-1000_800.bin Quote TIM-1.0 mv_ddr-devel-g251bc63 DDR4 16b 1GB 1CS TIM-1.0 mv_ddr-devel-g251bc63 DDR4 16b 1GB 1CS NOTICE: Booting Trusted Firmware NOTICE: BL1: v1.3(release):armada-17.06.2:a37c108 NOTICE: BL1: Built : 14:30:53, Jul 5 2 NOTICE: BL2: v1.3(release):armada-17.06.2:a37c108 NOTICE: BL2: Built : 14:30:55, Jul 5 20 NOTICE: BL31: v1.3(release):armada-17.06.2:a37c108 NOTICE: BL31: U-Boot 2017.03-armada-17.06.3-ga33ecb8 (Jul 05 2017 - 14:30:47 +0800) Model: Marvell Armada 3720 Community Board ESPRESSOBin CPU @ 1000 [MHz] L2 @ 800 [MHz] TClock @ 200 [MHz] DDR @ 800 [MHz] DRAM: 1 GiB U-Boot DComphy-0: USB3 5 Gbps Comphy-1: PEX0 2.5 Gbps Comphy-2: SATA0 6 Gbps SATA link 0 timeout. AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode flags: ncq led only pmp fbss pio slum part sxs PCIE-0: Link down MMC: sdhci@d0000: 0 SF: Detected w25q32dw with page size 256 Bytes, erase size 4 KiB, total 4 MiB After the boot it tries to boot from a network source instead of sdcard. printenv Quote baudrate=115200 boot_targets=usb sata mmc1 mmc0 bootargs=console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 root=/dev/nfs rw ip=10.10.10.4:10.10.10.4:10.10.10.1:255.255.255.0:marvell:eth0:none nfsroot=10.10.10.4:/srv/nfs/ bootcmd=run get_images; run set_bootargs; booti ${kernel_addr} ${ramfs_addr} ${fdt_addr} bootdelay=2 console=console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 ethact=neta@30000 ethprime=eth0 fdt_addr=0x1000000 fdt_high=0xffffffffffffffff fdt_name=fdt.dtb fdtcontroladdr=3fb1a7c8 gatewayip=10.10.10.1 get_images=tftpboot ${kernel_addr} ${image_name}; tftpboot ${fdt_addr} ${fdt_name}; run get_ramfs get_ramfs=if test "${ramfs_name}" != "-"; then setenv ramfs_addr 0x3000000; tftpboot ${ramfs_addr} ${ramfs_name}; else setenv ramfs_addr -;fi hostname=marvell image_name=Image initrd_addr=0xa00000 initrd_size=0x2000000 ipaddr=10.10.10.4 kernel_addr=0x2000000 loadaddr=0x2000000 netdev=eth0 netmask=255.255.255.0 ramfs_addr=- ramfs_name=- root=root=/dev/nfs rw rootpath=/srv/nfs/ serverip=10.10.10.4 set_bootargs=setenv bootargs ${console} ${root} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:none nfsroot=${serverip}:${rootpath} ${extra_params} stderr=serial@12000 stdin=serial@12000 stdout=serial@12000 I dont know how it got to this point all I want now is to be able to boot from sdcard. Any thoughts or ideas? 0 Quote Link to comment Share on other sites More sharing options...
smiles Posted July 27, 2022 Author Share Posted July 27, 2022 I figure it out. env default -a then saveenv got it back to a state I could boot it from sdcard. 0 Quote Link to comment Share on other sites More sharing options...
ManoftheSea Posted August 5, 2022 Share Posted August 5, 2022 Glad to hear it. I'm not sure how you had the old environment that only attempted tftpboot; but I'm glad "restore defaults" remains a good fix. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.