linda Posted July 28, 2022 Share Posted July 28, 2022 I'm using a Pine 64 LTS. For this I have downloaded the SoPine images Armbian_21.08.1_Pine64so_buster_current_5.10.60.img and Armbian_21.08.1_Pine64so_focal_current_5.10.60.img Both images boot normally (including network connection), but after the update (apt update, apt upgrade) no IP4 network connection is established for eth0. For help I am very grateful for any help. 0 Quote Link to comment Share on other sites More sharing options...
linda Posted July 29, 2022 Author Share Posted July 29, 2022 I managed to reconnect via DHCP again with the following steps: Insert these lines in /etc/network/interfaces auto eth0 iface eth0 inet dhcp pre-up ifconfig $IFACE up pre-up ethtool -s $IFACE speed 100 duplex full autoneg off and change the line in /etc/NetworkManager/NetworkManager.conf to [ifupdown] managed=false 0 Quote Link to comment Share on other sites More sharing options...
Pander Posted August 28, 2022 Share Posted August 28, 2022 First boot after installing a new image, I also had no connection on eth0. Error was that there was no carrier. What fixed it, was replugging the UTP connectors on both side of the cable. 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.