SPYT Posted March 22, 2023 Share Posted March 22, 2023 Hello! Recently i bought an Orange Pi 4 LTS. I choosen armbian for my os. I installed it to sd card, but I wanted more. I decided to flash the system to eMMc. It was a mistake. Instead armbian-config tool, i executed armbian-install, and flashed bootloader to eMMc 🤦♂️. After that, i was checking the sd card, reading the logs, nothing helped. I have official 5v 4a dc adapter, factory new sd card, but my board only shines with a red LED, and does not boot into the system. 0 Quote Link to comment Share on other sites More sharing options...
SPYT Posted May 9, 2023 Author Share Posted May 9, 2023 Serial output a this moment (with TF card): DDR Version 1.26 20210628 In channel 0 CS = 0 MR0=0x18 MR4=0x1 MR5=0x1 MR8=0x10 MR12=0x72 MR14=0x72 MR18=0x0 MR19=0x0 MR24=0x8 MR25=0x0 channel 1 CS = 0 MR0=0x0 MR4=0x0 MR5=0x0 MR8=0x0 MR12=0x0 MR14=0x0 MR18=0x0 MR19=0x0 MR24=0x0 MR25=0x0 channel 0 training pass! channel 1 training pass! change freq to 416MHz 0,1 Channel 0: LPDDR4,416MHz W FF != R Cap error! ERR 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.