yo8aiv Posted June 4, 2023 Share Posted June 4, 2023 (edited) http://paste.armbian.com/icedujiguw.yaml Hello everyone, trying to give new life to this old Orange Pi+ 2. Here is described what hapens when i try to boot up latest image. Can anyone help. Thanks in advance. Armbian 23.8 Bookworm Kernel 6.2.y, Size: 421Mb, Release date: Jun 3, 2023 SBC gets stuck after the request Sense .. and doesnt booy up, if i plug a device in usb ports, it bootloops .. see below using same sd-card and a diffrent image file works with no issues . hardware : grounded out pin 9 of the SD card slot (checked with multimeter and works) U-Boot SPL 2022.07-armbian (Jun 03 2023 - 19:37:25 +0000) DRAM: 2048 MiB Trying to boot from MMC1 U-Boot 2022.07-armbian (Jun 03 2023 - 19:37:25 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Plus / Plus 2 DRAM: 2 GiB Core: 65 devices, 18 uclasses, devicetree: separate WDT: Not starting watchdog@1c20ca0 MMC: mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Net: phy interface9 eth0: ethernet@1c30000 starting USB... Bus usb@1c1b000: USB EHCI 1.00 Bus usb@1c1d000: USB EHCI 1.00 scanning bus usb@1c1b000 for devices... EHCI timed out on TD - token=0x80008c80 unable to get device descriptor (error=-1) 2 USB Device(s) found scanning bus usb@1c1d000 for devices... Device NOT ready Request Sense returned 02 3A 00 SBC gets stuck after the request Sense .. and doesnt booy up, if i plug a device in usb ports, it bootloops .. see below U-Boot SPL 2022.07-armbian (Jun 03 2023 - 19:37:25 +0000) DRAM: 2048 MiB Trying to boot from MMC1 U-Boot 2022.07-armbian (Jun 03 2023 - 19:37:25 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi Plus / Plus 2 DRAM: 2 GiB Core: 65 devices, 18 uclasses, devicetree: separate WDT: Not starting watchdog@1c20ca0 MMC: mmc@1c0f000: 0, mmc@1c10000: 2, mmc@1c11000: 1 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Net: phy interface9 eth0: ethernet@1c30000 starting USB... Bus usb@1c1b000: USB EHCI 1.00 Bus usb@1c1d000: USB EHCI 1.00 scanning bus usb@1c1b000 for devices... Device NOT ready Request Sense returned 02 3A 00 undefined instruction pc : [<bbf93980>] lr : [<bffa3391>] reloc pc : [<4600b980>] lr : [<4a01b391>] sp : bbf5e848 ip : 0000001c fp : bffde94a r10: bffe5c00 r9 : bbf67ec0 r8 : 00000000 r7 : 00000000 r6 : bbf93b18 r5 : a0000000 r4 : bbf93b80 r3 : bbf93980 r2 : 00000000 r1 : 00000000 r0 : bbf93b80 Flags: NzCv IRQs off FIQs off Mode SVC_32 Code: bbf68cc8 00000000 00000000 00000000 (ffffffff) Resetting CPU ... resetting ... U-Boot SPL 2022.07-armbian (Jun 03 2023 - 19:37:25 +0000) DRAM: 2048 MiB Trying to boot from MMC1 Edited June 4, 2023 by yo8aiv adding details 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.