BatVanko Posted March 26 Share Posted March 26 Hi, is is possible to port the kahdas-edge2 changes (https://github.com/armbian/build/pull/6335) to the OrangePi 5b device tree? 0 Quote Link to comment Share on other sites More sharing options...
Efe Çetin Posted March 27 Share Posted March 27 You can add it like https://github.com/armbian/build/blob/main/patch/kernel/rockchip-rk3588-edge/board-khadas-edge2-add-nodes.patch#L1347 I suppose you don't need to make any change since 5b and edge2 uses the same pcie phy 0 Quote Link to comment Share on other sites More sharing options...
Efe Çetin Posted April 9 Share Posted April 9 hi @BatVanko would you like to try https://github.com/armbian/build/pull/6486? 0 Quote Link to comment Share on other sites More sharing options...
BatVanko Posted April 10 Author Share Posted April 10 @Efe Çetin I have tried this before, but I think there are more changes that has to be made for 5b. For example the pcie power is set to 1.8v instead of 3.3v https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts#L82-L91 ... I'll try some changes if I have time this weekend and I'll let you know. Thanks. 0 Quote Link to comment Share on other sites More sharing options...
OttawaHacker Posted April 20 Share Posted April 20 On 3/26/2024 at 12:49 PM, BatVanko said: Hi, is is possible to port the kahdas-edge2 changes (https://github.com/armbian/build/pull/6335) to the OrangePi 5b device tree? Is this to add support for ap6275p in the 6.x kernel series? Was going to ask the same question 0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.