ADS7846 libinput indicates no events

[D]

Hi,

 

I'm migrating from the OrangePi image to Armbian, and can't make the touchscreen working, it does not respond to any actions. It works pretty well on the OrangePi's image. Did I mess up something here?

 

uname -a:

 

Linux orangepizero2w 6.6.31-current-sunxi64 #1 SMP Fri May 17 10:02:40 UTC 2024 aarch64 GNU/Linux

 

Touchscreen DTS:

 

/dts-v1/;
/plugin/;
/ {
    compatible = "allwinner,sun50i-h616";
    fragment@0 {
        target-path = "/";
        __overlay__ {
            backlight_gpio: backlight_gpio {
                compatible = "gpio-backlight";
                gpios = <&pio 8 14 0>; // PI14
                default-on;
            };
            /*backlight_pwm: backlight_pwm {
                compatible = "pwm-backlight";
                brightness-levels = <0 25 50 75 100 125 150 175 200 225 255>;
                default-brightness-level = <6>;
                pwms = <&pwm 4 25000 0>; // PI14
                pwm_names = "backlight";
                status = "okay";

            };*/
        };
    };
    fragment@1 {
        target = <&spi1>;
        __overlay__ {
            status = "okay";
            cs-gpios = <&pio 7 5 0>; /*PH5=CS0 PH9=CS1*/
            ili9341: ili9341@0 {
                compatible = "adafruit,yx240qv29", "ilitek,ili9341";
                reg = <0>;
                pinctrl-names = "default";
                spi-max-frequency = <48000000>;
                rotation = <270>;
                reset-gpios = <&pio 8 6 0>; /* PI6 */
                dc-gpios = <&pio 7 4 0>; /* PH4 */
                backlight = <&backlight_gpio>;
            };
            ads7846: ads7846@0 {
                compatible = "ti,ads7846";
                reg = <1>;
                pinctrl-names = "default";
                spi-max-frequency = <2000000>;
                interrupts = <8 5 1>; /* PI5 - IRQ */
                interrupt-parent = <&pio>;
                pendown-gpio = <&pio 8 5 0>; /* PI5 */

                ti,swap-xy = <1>;
                ti,keep_vref_on = /bits/ 16 <1>;
                ti,x-min = /bits/ 16 <280>;
                ti,y-min = /bits/ 16 <350>;
                ti,x-max = /bits/ 16 <3850>;
                ti,y-max = /bits/ 16 <3850>;
                ti,pressure-min = /bits/ 16 <0>;
                ti,pressure-max = /bits/ 16 <255>;
                ti,x-plate-ohms = /bits/ 16 <133>;
                ti,debounce-max = /bits/ 16 <50>;
                ti,debounce-tol = /bits/ 16 <30>;
                ti,debounce-rep = /bits/ 16 <1>;
                wakeup-source;
            };
        };
    };
};

 

Xorg.0.log (fragment):

 

[    19.707] (II) config/udev: Adding input device ADS7846 Touchscreen (/dev/input/event0)
[    19.707] (**) ADS7846 Touchscreen: Applying InputClass "libinput touchscreen catchall"
[    19.707] (**) ADS7846 Touchscreen: Applying InputClass "calibration"
[    19.707] (II) LoadModule: "libinput"
[    19.708] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    19.733] (II) Module libinput: vendor="X.Org Foundation"
[    19.733]    compiled for 1.21.1.3, module version = 1.2.1
[    19.733]    Module class: X.Org XInput Driver
[    19.733]    ABI class: X.Org XInput driver, version 24.4
[    19.733] (II) Using input driver 'libinput' for 'ADS7846 Touchscreen'
[    19.733] (**) ADS7846 Touchscreen: always reports core events
[    19.733] (**) Option "Device" "/dev/input/event0"
[    19.772] (II) event0  - ADS7846 Touchscreen: is tagged by udev as: Touchscreen
[    19.773] (II) event0  - ADS7846 Touchscreen: device is a touch device
[    19.773] (II) event0  - ADS7846 Touchscreen: device removed
[    19.824] (**) Option "config_info" "udev:/sys/devices/platform/soc/5011000.spi/spi_master/spi1/spi1.1/input/input0/event0"
[    19.824] (II) XINPUT: Adding extended input device "ADS7846 Touchscreen" (type: TOUCHSCREEN, id 6)
[    19.825] (**) Option "AccelerationScheme" "none"
[    19.825] (**) ADS7846 Touchscreen: (accel) selected scheme none/0
[    19.825] (**) ADS7846 Touchscreen: (accel) acceleration factor: 2.000
[    19.825] (**) ADS7846 Touchscreen: (accel) acceleration threshold: 4
[    19.828] (II) event0  - ADS7846 Touchscreen: is tagged by udev as: Touchscreen
[    19.829] (II) event0  - ADS7846 Touchscreen: device is a touch device
[    19.831] (II) config/udev: Adding input device ADS7846 Touchscreen (/dev/input/mouse0)
[    19.831] (**) ADS7846 Touchscreen: Applying InputClass "calibration"
[    19.831] (II) No input driver specified, ignoring this device.
[    19.831] (II) This device may have been added with another device file.
[    19.833] (II) config/udev: Adding input device sunxi-ir (/dev/input/event1)
[    19.833] (**) sunxi-ir: Applying InputClass "libinput keyboard catchall"
[    19.833] (II) Using input driver 'libinput' for 'sunxi-ir'
[    19.833] (**) sunxi-ir: always reports core events
[    19.833] (**) Option "Device" "/dev/input/event1"
[    19.836] (II) event1  - sunxi-ir: is tagged by udev as: Keyboard Pointingstick

 

[robertoj]

Hello

 

I assume that the tft lcd is working 100%, displaying text and graphics.

 

can you share what you get from the tests in my post here?

 

also, what are your wiring connections?

 

https://forum.armbian.com/topic/27457-connecting-banana-pi-m2-zero-with-ili9341-display-over-spi-on-latest-armbian-image/?do=findComment&comment=201947

 

Edit: your DTS seems to be missing a lot of connection definitions. Look at your DTS to the DTS that was posted last in my thread topic, and compare their structures.

[robertoj]

Did you ever solve your problem?