only start with toothstick on emmc ... can't start with sdhc

[xNiux]

Hi !

 

I started from SDHC armbian-24.08 on my Magicsee N5+ (s905x3). I installed system on the eMMC.

But now, the system can only start on the eMMC, but only with the toothstick method ... And I can't start again on the SDHC to try the 24.11 for example.

 

Is that any solution :

 

1. to make start on eMMD without toothstick

2. to start system with SDHC

 

Thanks for your help

[xNiux]

Ok,I now Can start with sdhc : I installed and executed u-boot-menu.

[Pita Bread]

On 10/29/2024 at 2:57 PM, xNiux said:

: I installed and executed u-boot-menu.

 

Very interesting. I am reading some other posts about this topic such as thie posts  here and here. But can you explain how to install it and use please? Thanks.

[xNiux]

hum, I just install it and execute it : 

Installation : sudo apt-get -y install u-boot-menu

Execution (I'm not sure) : sudo u-boot-menu

 

... And reboot

[xNiux]

More precision :

1. Install all u-boot packagés

2. Connect your boot USB stick or sdcard

3. Exécuté 'dudo u-boot-refresh'

4. Reboot

 

And hop, it start on USB or sdcard