mxq pro 4k 5g allwinner h313 can't sd card boot

[Ducdanh Nguyen]

(sorry for bad english)

 

i'm looking to boot in an armbian bookworm by sicxnull on my mxq pro 4k 5g, i checked the aida64, it showed the allwinner h313, i tried the toothpick method to the recovery menu (which have a boot option?) i'm novice to android 😕

 

by the way here are the images of the tv box pcb:

 

[ccs1664]

Hi 

I think that a boot on this TV box it should  be not so hard, I never tested an Allwiner.
Please, start reading some advices from this post from 2023:

once that h313, probably follows at the same procedure of the H61X ...
I hope to help you

ccs
 

Edited August 10 by ccs1664

[Ducdanh Nguyen]

@ccs1664 thanks for the information, but i already have a image that works on my mxq pro 4k 5g allwinner h313, but im struggling how to boot in the sd card, and i cant enter recovery mode too (it showed an update screen but nithing updated) im glad you replied to my situation.

[Nick A]

@Ducdanh Nguyen @ccs1664 is correct.. there’s a lot of information on that thread and the x96q threads to get your box running. I have to post the same advice over and over again.

 

The last thread you posted in. I gave instructions to get your dram settings and dts. Have you extracted them?

 

it could be possible that you have secure boot.

[Ducdanh Nguyen]

6 hours ago, Nick A said:

 

@Ducdanh Nguyen @ccs1664 is correct.. there’s a lot of information on that thread and the x96q threads to get your box running. I have to post the same advice over and over again.

 

The last thread you posted in. I gave instructions to get your dram settings and dts. Have you extracted them?

 

it could be possible that you have secure boot.

 

Thanks for noticing me!!! I will check the last thread ive been in and the dram settings and dts, i havent checked also i cant edit/change dram and dts, i use windows but i will use a virtual machine to get the armbian doing its job.

 

and from the secure boot, it could be because when i do the “toothpick method”, it showed the updating screen but nothing updated

 

thanks you for replying to me

 

edit: is the text too blurry? I could take more 😃

Edited August 12 by Ducdanh Nguyen

[Ducdanh Nguyen]

@Nick A sorrry but i didn't found where you replied to me could you repost it to mine trhead?😁

[Nick A]

 Start reading here.. 

[Ducdanh Nguyen]

@Nick Aok, im working on it

Edited Thursday at 01:08 PM by Ducdanh Nguyen

[Ducdanh Nguyen]

@Nick AMay i ask you a question? If yes , why wont my boxtry and boot on that amrbian image? I plugged in and it should detetct and boot to the sd card right?

[Nick A]

@Ducdanh Nguyen hard to tell. I don’t see any markings for uart. It’s not going to be easy to debug your board. 

[Ducdanh Nguyen]

@Nick A To be honest i don't really think about debug my box, but i sure will do more research after getting all settings done.

[Ducdanh Nguyen]

@Nick A could you help me get the dram settings??? My box don't have root access, on aida64, it says my box has root, but the tv info (https://play.google.com/store/apps/details?id=com.saksham.developer.tvinfo&hl=en&pli=1) says it is not rooted?

[Nick A]

 

[Ducdanh Nguyen]

@Nick A 👍