armbian-install not detecting devices on RockPi-S correctly

[Meestor_X]

Is there a github repo for armbian-install? On the RockPi-S with both eMMC and SD cards installed, it's showing the devices backwards or un-named in the menu. I'd like to open an issue report to see if it can be fixed.

Edited 19 hours ago by Meestor_X

[Meestor_X]

Can someone explain these lines?

	# find real mmcblk device numbered 0, 1, 2 for eMMC, SD
	for ret in $(find /dev -name 'mmcblk[0-2]' -and -type b)
	do
		if [ -b ${ret}boot0 ];then
			emmc_dev=$ret
		else
			sd_dev=$ret
		fi
	done

On the RockPi-S, $ret would equal mmcblk0 and mmcblk1 which are the eMMC and SD card, respectively. There's no device called "mmcblk0boot0" or "mmcblk1boot0".

[Meestor_X]

Oh! I guess I reported this same issue a while ago - never got an answer.

Is there a github repo to report issues with this program?

[going]

16 часов назад, Meestor_X сказал:

Is there a github repo for armbian-install? On the RockPi-S with both eMMC and SD cards installed, it's showing the devices backwards or un-named in the menu. I'd like to open an issue report to see if it can be fixed.

Please post the output of the df -h and lsblk commands here.

Which image are you using and which version of u-boot is running on your board? (this can be seen in the UART console)