armbian-install not detecting devices on RockPi-S correctly

[Meestor_X]

Is there a github repo for armbian-install? On the RockPi-S with both eMMC and SD cards installed, it's showing the devices backwards or un-named in the menu. I'd like to open an issue report to see if it can be fixed.

Edited yesterday at 05:09 PM by Meestor_X

[Meestor_X]

Can someone explain these lines?

	# find real mmcblk device numbered 0, 1, 2 for eMMC, SD
	for ret in $(find /dev -name 'mmcblk[0-2]' -and -type b)
	do
		if [ -b ${ret}boot0 ];then
			emmc_dev=$ret
		else
			sd_dev=$ret
		fi
	done

On the RockPi-S, $ret would equal mmcblk0 and mmcblk1 which are the eMMC and SD card, respectively. There's no device called "mmcblk0boot0" or "mmcblk1boot0".

[Meestor_X]

Oh! I guess I reported this same issue a while ago - never got an answer.

Is there a github repo to report issues with this program?

[going]

16 часов назад, Meestor_X сказал:

Is there a github repo for armbian-install? On the RockPi-S with both eMMC and SD cards installed, it's showing the devices backwards or un-named in the menu. I'd like to open an issue report to see if it can be fixed.

Please post the output of the df -h and lsblk commands here.

Which image are you using and which version of u-boot is running on your board? (this can be seen in the UART console)

[Meestor_X]

df -h
Filesystem      Size  Used Avail Use% Mounted on
udev            159M     0  159M   0% /dev
tmpfs            47M  4.8M   42M  11% /run
/dev/mmcblk1p1   58G  3.4G   53G   7% /
tmpfs           234M   76K  233M   1% /dev/shm
tmpfs           5.0M     0  5.0M   0% /run/lock
tmpfs           234M  4.0K  234M   1% /tmp
/dev/zram1       47M  2.4M   42M   6% /var/log
/dev/mmcblk0p1  3.4G  2.0G  1.3G  62% /media/emmc
tmpfs            47M     0   47M   0% /run/user/0

 

lsblk
NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINTS
mmcblk1     179:0    0  59.6G  0 disk 
└─mmcblk1p1 179:1    0    59G  0 part /var/log.hdd
                                      /
mmcblk0     179:32   0   3.6G  0 disk 
└─mmcblk0p1 179:33   0   3.5G  0 part /media/emmc
zram0       252:0    0 233.1M  0 disk [SWAP]
zram1       252:1    0    50M  0 disk /var/log
zram2       252:2    0     0B  0 disk 

 

lsb_release -a
No LSB modules are available.
Distributor ID:	Debian
Description:	Armbian 25.8.1 bookworm
Release:	12
Codename:	bookworm

uname -r
6.12.44-current-rockchip64

 

I don't have an easy way to do the serial terminal thing to check U-Boot. I have updated it to the "latest" using armbian-install, however...