Repurpose a TV Box Allwinner H313 (similar to H96 Max) to boot secure image

[Sergioclr]

Activity:

1) 159-add-x96-q-lpddr3-v1.3-defconfig.patch has been tested both ways: with original parameters and with suggested (above) parameters;

2) The box boots but I am unable to set  IP addresses, even in wlan0, via Armbian-config (errors reported);

3) So far the best result is from  ~/build/patch/u-boot/u-boot-sunxi/board_x96q/arm64-sun50i-h313-add-x96q-lpddr3-defconfig.patch with the appropriate +CONFIG_SPL_IMAGE_TYPE_SUNXI_TOC0=y

    and secure-boot.patch. Armbian-config works as designed and IP addresses can be set.

 

Ideas: 

describes a similar problem (eth0) 

Suggested action plan: https://github.com/armbian/build/pull/6617/files       [Fix issue #6528 opi-zero2w, ethernet PHY not powered #6617]

 

Problem: I don't know how to implement it and/or if that proposed corrections will tamper with ~/build/patch/u-boot/u-boot-sunxi/board_x96q/sunsi-add-h616-internal-eth-phy-support.patch

 

As usual, suggestions will be welcome 🙂

Edited 1 hour ago by Sergioclr
link