Repurpose a TV Box Allwinner H313 (similar to H96 Max) to boot secure image

[Sergioclr]

Activity:

1) 159-add-x96-q-lpddr3-v1.3-defconfig.patch has been tested both ways: with original parameters and with suggested (above) parameters;

2) The box boots but I am unable to set  IP addresses, even in wlan0, via Armbian-config (errors reported);

3) So far the best result is from  ~/build/patch/u-boot/u-boot-sunxi/board_x96q/arm64-sun50i-h313-add-x96q-lpddr3-defconfig.patch with the appropriate +CONFIG_SPL_IMAGE_TYPE_SUNXI_TOC0=y

    and secure-boot.patch. Armbian-config works as designed and IP addresses can be set.

 

Ideas: 

describes a similar problem (eth0) 

Suggested action plan: https://github.com/armbian/build/pull/6617/files       [Fix issue #6528 opi-zero2w, ethernet PHY not powered #6617]

 

Problem: I don't know how to implement it and/or if that proposed corrections will tamper with ~/build/patch/u-boot/u-boot-sunxi/board_x96q/sunsi-add-h616-internal-eth-phy-support.patch

 

As usual, suggestions will be welcome 🙂

Edited Wednesday at 02:26 PM by Sergioclr
link

[Nick A]

@Sergioclr 

You don't need patches to edit the kernel config:
config/kernel/linux-sunxi64-legacy.config

 

sicxnull already has this patch, but with a different name:
drv-pwm-sun50i-h616-enhance-pwm.patch
drivers-pwm-Add-pwm-sunxi-enhance-driver-for-h616.patch

 

To add Zero2W Ethernet settings to your DTS, you can create your own patch using git commands:

 

Run ./compile.sh

 

Press Ctrl+C in the middle of the kernel compilation.

 

Navigate to the directory:
cd cache/sources/linux-kernel-worktree/6.6*/

 

Use the following commands:
sudo git status
sudo git add .
sudo git commit -m "dummypatch"

sudo pico arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-lpddr3.dts
sudo git add .
sudo git commit -m "Fix Ethernet"
sudo git format-patch -1   

 

1 for the first commit (0001-Fix-Ethernet.patch)...  2 for the first and second commit (0002-dummypatch.patch) )

 

The first "add" and "commit" cleans the kernel of previous patches, leaving you with a clean, patched kernel.

 

The format-patch command will create a patch in the root directory of the kernel. Copy it to your patch directory.

 

For original Armbian kernel patches, you must add them to series.armbian and series.conf.

Edited Wednesday at 04:20 PM by Nick A

[Sergioclr]

Help needed (previous update):

 

What should be edited is this file?  sudo pico arch/arm64/boot/dts/allwinner/sun50i-h313-x96q-lpddr3.dts

 

Thanks in advance.

[Nick A]

@Sergioclr Can you post your boot logs? both android and armbian.

Try this. 
phy-supply = <&reg_dldo1>;  /* Try reg_dldo1 if aldo1 (1.8V) fails */

Edited Friday at 05:27 PM by Nick A

[Sergioclr]

Newbie question: how can I do that (boot logs)? 🤔

[Nick A]

@Sergioclr output of USB-to-TTL converter.

 

sudo dmesg

[Sergioclr]

Good evening.

 

Armbian for H313 X96-Q LPDDR3 TV-Box

sicXnull/armbian-build)

git clone --depth=1 --branch=main  https://github.com/armbian/build 

"+CONFIG_SPL_IMAGE_TYPE_SUNXI_TOC0=y" in ~/build/patch/u-boot/u-boot-sunxi/board_x96q/arm64-sun1-h313-addr-x96q-lpddr3-defconfig.patch , adding secure-boot.patch and

    ~/build/patch/u-boot/u-boot-sunxi/board_x96q/sunsi-add-h616-internal-eth-phy-support.patch left untouched  

 

Android-boot.txt  (normal boot sequence / eth & wlan=OK)

Armbian_image_reboot_dmesg.txt

Image reboot (sudo shutdown -r now) + dmesg log (wlan=OK, eth=not OK)

 

Thanks in advance.

Android-boot.txt Armbian_image_reboot_dmesg.txt

[Nick A]

@Sergioclr looks like you are building armbian main branch. You are running the 6.18 kernel but old u-boot 2024.01. I don’t see the AC200/300 patch. 
 

Do you still have my build laying around. Can you show me the boot logs.
 

[Sergioclr]

No, unfortunately, I don't have.

I will run your build and, possibly, have all required data by tomorrow morning.

 

Thanks for your prompt answer,