Jump to content

Recommended Posts

Posted (edited)

Apologies this seems to have posted twice could admin please delete one of them 

 

Hi all, I built an image for my new Odroid M2 16 GB board using the parameters in my config-odroid.conf 

 

BOARD=odroidm2
RELEASE=trixie
BUILD_DESKTOP=no
BUILD_MINIMAL=yes
KERNEL_CONFIGURE=no

 

Issued compile.sh odroid 
It built and booted first time

I configured it using armbian-install to boot from the emmc and use a 
1tb Samsung nvme as the system disk

Rebooted after removing the sdcard 
Everything seemed to work until I tried to flash another image to the sdcard with dd

The flash immediately stalled and killed my windows Putty session

Some of the errors from dmesg
 

mmc1: Card stuck being busy! __mmc_poll_for_busy
dwmmc_rockchip fe2c0000.mmc: Busy; trying anyway
mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80200000)
GPT PMBR size mismatch (7675903 != 62333951)
The primary GPT table is corrupt, but the backup appears OK.


I have no idea what to do 
My intention was to try different images to ascertain which worked best
which I can still do but i have to flash the card on another box
I hope this makes sense

Kind regards

Pete Kane


 

 

Edited by pkfox
add text

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines