bl4ckc00k1e Posted January 22, 2016 Posted January 22, 2016 Hi when i connect to the WUBR-508N to the UART conexion, the raspberry2 and the BPI-M2 turn off... i try to test other pines of Ground and Power but i have the same result... Its possible that the board WUBR comes bad?? or before i must to configure something on system?
wildcat_paris Posted January 23, 2016 Posted January 23, 2016 @bl4ckc00k1e when you mention WUBR-508N, is it http://www.amazon.com/SparkLAN-WUBR-508N-802-11a-Adaptor-Ralink/dp/B00MHYQADI?tag=duckduckgo-d-20 ? question: do you lack of USB port to go over (serial) UART?
bl4ckc00k1e Posted January 23, 2016 Author Posted January 23, 2016 @bl4ckc00k1e when you mention WUBR-508N, is it http://www.amazon.com/SparkLAN-WUBR-508N-802-11a-Adaptor-Ralink/dp/B00MHYQADI?tag=duckduckgo-d-20 ? question: do you lack of USB port to go over (serial) UART? Is this board: And i try to connect this usb conection to the UART in the GPIO
Recommended Posts