bl4ckc00k1e Posted January 22, 2016 Share Posted January 22, 2016 Hi when i connect to the WUBR-508N to the UART conexion, the raspberry2 and the BPI-M2 turn off... i try to test other pines of Ground and Power but i have the same result... Its possible that the board WUBR comes bad?? or before i must to configure something on system? Link to comment Share on other sites More sharing options...
wildcat_paris Posted January 23, 2016 Share Posted January 23, 2016 @bl4ckc00k1e when you mention WUBR-508N, is it http://www.amazon.com/SparkLAN-WUBR-508N-802-11a-Adaptor-Ralink/dp/B00MHYQADI?tag=duckduckgo-d-20 ? question: do you lack of USB port to go over (serial) UART? Link to comment Share on other sites More sharing options...
bl4ckc00k1e Posted January 23, 2016 Author Share Posted January 23, 2016 @bl4ckc00k1e when you mention WUBR-508N, is it http://www.amazon.com/SparkLAN-WUBR-508N-802-11a-Adaptor-Ralink/dp/B00MHYQADI?tag=duckduckgo-d-20 ? question: do you lack of USB port to go over (serial) UART? Is this board: And i try to connect this usb conection to the UART in the GPIO Link to comment Share on other sites More sharing options...
Recommended Posts