Jump to content

changing video output (Olinuxino A20 Micro)


filippo

Recommended Posts

I've just downloaded the Debian-server mainline image for my Olinuxino A20 Micro (Armbian_5.38 etc) and tried, without success, to change the video output from the default HDMI to the VGA one.

Following the documentation (https://docs.armbian.com/Hardware_Allwinner/) I modified the boot.cmd file adding the lines:

setenv video-mode sunxi:monitor=vga,hpd=0,edid=0
saveenv
and recompiling it but the video continues to be enabled on the HDMI output, also after 2 (and more) restart.

I noticed that in the boot splash screen a "Err: VGA" is reported.

It's not too clear from the documentation if this setting can be applied also modifying the armbianEnv.txt file or if editing and recompiling the boot.cmd file is the right way, anyway my question is: what should in order to enable the VGA output?

Thank you in advance

Link to comment
Share on other sites

I have the same problem on my Cubietruck.

On legacy kernel i was able to use script.fex file on /boot directory, but this method has changed on mainline kernel. I don't know how to figure it out!

Link to comment
Share on other sites

1 hour ago, I'mTO1 said:

I have the same problem on my Cubietruck.

On legacy kernel i was able to use script.fex file on /boot directory, but this method has changed on mainline kernel. I don't know how to figure it out!

I've used this  workaround and it works!

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines