yam1 Posted April 22, 2018 Share Posted April 22, 2018 I just need the ethernet connector. Does anyone know the pin connections to this? It's not marked. The double USB from orange pi zero IO expansion works fine but the audio out is a bit noisy. I had to use a separate audio port. This is one of the few boards with double SPIs and they both work fine. Thanks for the easy user overlay customization support. This is my $7.99 256mb neo core, note there is a chip missing (3rd picture). Starting up in X is slower - it waits for a second or two each time - don't know why, any ideas? It cannot be the swap as I monitored the swap and its only using 125mb. I have the system on the USB thumb drive. Link to comment Share on other sites More sharing options...
Recommended Posts