svd93 Posted June 10, 2018 Share Posted June 10, 2018 Hi to all! I am using Orange PC Plus and wanted to connect small display to it. I wanted to have display as ready device : in casing, with power etc. So I bought this one Aliexpress link It has HDMI, VGA and A/V input and for 35-45 USD only. Resolution (described) - 1024*600/800*480 Works with Raspberry Pi3 OK! But I need linux board with built-in eMMC memory. So I bought Orange PC plus. But it does not cooperate with this display in any modes, avaliable in h3disp (including 800*480). Also it doesnt work via my HDMI to VGA converter and A/V input is not compatible too. May be somebody have some experience in cooperation with these cheap China monitors - it can be very useful solution if will work with Orange Pi etc. Because it is ready device with casing, buttons etc. I think about buy Banana Pi too, but afraid that can face same problem. thanks for your opinions! Link to comment Share on other sites More sharing options...
Recommended Posts