gabor_ka Posted July 5, 2016 Posted July 5, 2016 Hey everyone. I have an MK802 II stick, which has the A10 s.o.c, so i use the Olinuxino Lime a10 image on it. Everything works pretty much fine, except one little thing. This machine has worked fine with non-standard resolutions, like 1440x900, or 1280x1024. Now, when i turn it on, the U-boot screen appears correctly, it even shows that it set the resolution to 1440x900, and after that, the monitor says "signal out of range". Of course, it works well with a 1080p monitor, but i wanted to use this one too. Thanks!
amsel Posted July 11, 2016 Posted July 11, 2016 Same with me!I have a Banana Pi Router M1, with a Allwinner A20, booting with 1280 x 1024 at the beginning. Afterwards there is the out-of-range-thing. No problems with vnc and LXDE (Lightweight X11 Desktop Enviroment) though! http://forum.armbian.com/index.php/topic/1586-bpi-r1-display-out-of-range-error/ It doesn't seem to interst anyone. Do you have any idea yet?
Recommended Posts