I built latest image Armbian-unofficial 25.05.0-trunk noble, Kernel 6.12.11-edge-sunxi64 for my Vontar H618 I can't get IR remote to work doing same steps as on previous builds.

I tried to use strace to determine the cause of this message but couldn't find it. There are really some config files in /etc missing but adding them did not resolve the issue.

Jock updated his repository. If you are running XFCE turn off the compositor for smooth playback. killall xfwm4 && xfwm4 --compositor=off &

does it make sense to publish both compressed and uncompressed in that case? No: additional compute requirements for CICD to compress images additional storage Yes less bandwidth for our mirrors and users faster downloads What do you say? I have another question: What do you mean exactly by docker support? Are you saying these images have somehow been prepped for easier consumption by docker? Please clarify. I suggest to document this properly somewhere to help in wider adoption and better user experience. This should be good for people testing armbian without having to flash an image to real hardware or without even owning an SBC. Another use case you already mentioned is automatic testing.

If the spec is correct the voltage accuracy of the PSU is ±5% and the output ripples is 120mVpp which is rather high for a good PSU. There are 2 condensers soldered to the HDD power cord to compensate for that and guard the HDD drives (kind of ugly, yet a cheap solution), but isn't it too much for the components of the PCB? https://wiki.kobol.io/helios64/files/psu/YHY_12V_PSU_Specification.pdf