Hello
(sorry, I am writing through a translator)
I have a Zyxel NAS326 with a physically damaged NAND - it does not save the device configuration.
board photo:
Because I do not have access to the programmer, I want to replace NAND and program it in the NAS.
However, I can not run U-Boot via UART.
I tried the adapters on PL2303HX and FTDI FT232RL.
I'm using a kwboot on this topic:
and the u-boot file from this: https://forum.doozan.com/read.php?2,27108,31893#msg-31893
Every time this error pops up:
root@gutek3:/gutek/nas326# ./kwboot-x86_64 -f -t -B 115200 /dev/ttyUSB0 -b uboot.bin -s 0 -q 1
Sending boot message. Please reboot the target...|
Sending boot image...
0 % [+++++++++++++++++xmodem: Bad message
Sometimes it seems to start uploading, but there is also a error:
root@gutek3:/gutek/nas326# ./kwboot-x86_64 -f -t -B 115200 /dev/ttyUSB0 -b uboot.bin -s 0 -q 1
Sending boot message. Please reboot the target...\
Sending boot image...
0 % [......................................................................]
0 % [..................................+++++++++++++++++xmodem: Bad message
Please help.
Thank you.