@GUTEK@

Members
  • Content Count

    5
  • Joined

  • Last visited

About @GUTEK@

  • Rank
    Newbie

Profile Information

  • Gender
    Not Telling
  • Location
    Poland

Recent Profile Visitors

605 profile views
  1. Hello (sorry, I am writing through a translator) I have a Zyxel NAS326 with a physically damaged NAND - it does not save the device configuration. board photo: Because I do not have access to the programmer, I want to replace NAND and program it in the NAS. However, I can not run U-Boot via UART. I tried the adapters on PL2303HX and FTDI FT232RL. I'm using a kwboot on this topic: and the u-boot file from this: https://forum.doozan.com/read.php?2,27108,31893#msg-31893 Every time this error pops up: root@gutek3:/gutek/nas326# ./kwboot-x86_64 -f -t -B 115200 /dev/ttyUSB0 -b uboot.bin -s 0 -q 1 Sending boot message. Please reboot the target...| Sending boot image... 0 % [+++++++++++++++++xmodem: Bad message Sometimes it seems to start uploading, but there is also a error: root@gutek3:/gutek/nas326# ./kwboot-x86_64 -f -t -B 115200 /dev/ttyUSB0 -b uboot.bin -s 0 -q 1 Sending boot message. Please reboot the target...\ Sending boot image... 0 % [......................................................................] 0 % [..................................+++++++++++++++++xmodem: Bad message Please help. Thank you.
  2. Thank you very much for copying MY picture without the signature of the author.
  3. Thank you very much for your help! FIXET IT YOURSELF! Community OPi is terrible, you can not get any help. Both here and on the official forum!
  4. Hello, this is my first topic on the forum. Please forgive my English is poor. I use Orange Pi PC, version Armbian_5.05_Orangepih3_Debian_jessie_3.4.110, with a patch to kswapd0: CMA-linux-image-sun8i_5.07_armhf.deb from this: https://github.com/igorpecovnik/lib/issues/219 SD card is: SanDisk microSDXC UHS-I 64GB speed up to 48MB/s (write speed in OPi is over 20MB/s). I have a problem that when writing to the card. For example, downloading a file by multiple instances wget. The SD card stops responding and crashes Opi. Only helps to disconnect the power supply. The card is new and fully operational. When I connect the monitor displays the following message: Please help. Thanks.