thatchunkylad1989

You can install from an eMMC/SDCARD to a USB and boot from SPI...

How can I use this on different Ubuntu Bionic builds? not just Armbian?

@JMCC Thank you! I now have Chromium w/ hardware acceleration! it's a shame the 32bit Chromium/Streaming doesn't have it, though.

@JMCC according to Chromium (NOT streaming/32) normal chromium is accelerated:

@JMCC and @NicoD so what should I tick on a fresh install?

I also didn't update anything, I done all this on a fresh 5.75 image. ran the "media script" ticked system, selected arm soc and opengl wrapper. then rebooted and selected streaming and mpv. Chromium refuses to get HW acceled....

@TonyMac32 alright. I still don't have any LibGL. MPV works fine. weird.

@TonyMac32 care to help? Ok, so testing... I selected; "system" and "opengl wrapper" and nothing else, let that install... I set it to use arm soc xorg.... I rebooted. then unticked "system" and didn't tick "opengl" and then I ticked streaming, and mpv... chromium still says that it's NOT hw acceled. Here's Chromium's GPU settings: Help?!?!!??!

@TonyMac32

Just to add to this: root@rock64:/home/rock64/Desktop# glxgears libGL error: unable to load driver: rockchip_dri.so libGL error: driver pointer missing libGL error: failed to load driver: rockchip but under es2_info: GL_RENDERER: Mali-4 Help?!

From the media script thread: Chromium is unusable right now. I'm having to use Firefox. EDIT1: I ran the media-script .sh and it auto installed the default selection and I also ticked "streaming" which I know is Chromium... EDIT2: I'm on the latest Chromium for Ubuntu bionic... 73.x EDIT3: This is what Chromium says under "chrome://gpu": What am I doing wrong? es2_info: and glxgears:

I'm using the 5.75 image which comes with the 4.4 kernel, updated everything with "apt update -y && apt upgrade -y && apt dist-upgrade -y" and I installed system, chromium and mpv. mpv works fine.. however; chromium states: Flash Stage3D: Software only. Hardware acceleration disable And others too. it's slow and can't load youtube videos at 480p.... what next? EDIT: Yes, I ran the script and installed system, mpv and chromium. chromium under "chrome://gpu" states that it IS software only and not HW accelerated.....

Hi, I have installed Armbian and updated everything. I'm running Chromium 73.x and I can't even play 480p youtube videos. What am I doing wrong? I'm on a Rock64 v2.

Still get the same error with your links....

Please see the edit

I would try that but I tried flashing a rom for it and now I keep getting a disk error at 7%.... This is the file I'm trying to flash: https://mega.nz/#!VnhjTSYa!t6w10yz0zXHFCRugsvZJibyjISz_g7uN-jAJp9OVKZI Also tried: s905w_atvXperience_v2FF the above link worked and flash sucsessfully but I can't boot it, the box doesn't show anything on my TV. tried multiple too. I keep getting a disc write error???????????????? How long does android take to boot after a successful flash? This is the error: I've tried Windows 10 and Windows 7; both the same!!!!!!!!!!!!!!!!!!!!! This is the log file: [21:05:27 846][Global][Inf]--Get system Info : [21:05:27 846][Global][Inf]--Windows Version: Microsoft Windows 7, Bit: 64 [21:05:27 846][Global][Inf]--Scan usb device [21:05:27 846][Global][Inf]--Aml scan WorldCup Device [21:05:27 846][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:05:27 846][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&90#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:05:27 846][Global][Inf]---->Roothub:USB#ROOT_HUB#4&37da9ca7&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:05:27 846][Global][Inf]-------->[Port0]NoDeviceConnected [21:05:27 846][Global][Inf]-------->[Port1]Other device [21:05:27 846][Global][Inf]-------->[Port2]NoDeviceConnected [21:05:27 846][Global][Inf]-------->[Port3]NoDeviceConnected [21:05:27 846][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:05:27 846][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&98#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:05:27 846][Global][Inf]---->Roothub:USB#ROOT_HUB#4&942ebd6&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:05:27 846][Global][Inf]-------->[Port0]NoDeviceConnected [21:05:27 846][Global][Inf]-------->[Port1]NoDeviceConnected [21:05:27 846][Global][Inf]-------->[Port2]NoDeviceConnected [21:05:27 846][Global][Inf]-------->[Port3]NoDeviceConnected [21:05:27 846][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:05:27 846][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&92#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:05:27 846][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&352504d9&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:05:27 846][Global][Inf]-------->[Port0]NoDeviceConnected [21:05:27 846][Global][Inf]-------->[Port1]NoDeviceConnected [21:05:27 846][Global][Inf]-------->[Port2]NoDeviceConnected [21:05:27 846][Global][Inf]-------->[Port3]NoDeviceConnected [21:05:27 846][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:05:27 846][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&9a#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:05:27 846][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&126b947d&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:05:27 846][Global][Inf]-------->[Port0]NoDeviceConnected [21:05:27 846][Global][Inf]-------->[Port1]NoDeviceConnected [21:05:27 846][Global][Inf]-------->[Port2]NoDeviceConnected [21:05:27 862][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:05:27 862][Global][Inf]--Scan USB host controller complete [21:05:27 862][Global][Inf]--Update data center with HubMap [21:05:27 862][Global][Inf]--Insert new hub4 [21:05:27 862][Global][Inf]--Update hub4 device data [21:05:27 862][Global][Inf]--Update HUB4-1 [21:05:27 862][HUB4-1][Inf]--Update device path [21:05:27 862][Global][Inf]--Update HUB4-2 [21:05:27 862][HUB4-2][Inf]--Update device path [21:05:27 862][Global][Inf]--Update HUB4-3 [21:05:27 862][HUB4-3][Inf]--Update device path [21:05:27 862][Global][Inf]--Update HUB4-4 \\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:05:27 862][HUB4-4][Inf]--Update device path [21:05:27 862][Global][Inf]--Begin thread for HUB4-4 [21:05:27 862][Global][Inf]--Burning thread HUB4-4 start [21:05:27 862][Global][Inf]--Burning thread HUB4-4 begin run [21:05:37 331][Global][Inf]--User click open button [21:05:50 107][Global][Inf]--Image path D:\Downloads\MXQPRO_S905W_20171218_SD_AndroidTVBox.eu\recovery.img [21:05:50 107][Global][Inf]--OpenImg D:\Downloads\MXQPRO_S905W_20171218_SD_AndroidTVBox.eu\recovery.img [21:05:55 177][Global][Inf]--User click open button [21:05:58 594][Global][Inf]--Image path D:\Downloads\aml_upgrade_package.img [21:05:58 594][Global][Inf]--OpenImg D:\Downloads\aml_upgrade_package.img [21:06:06 830]Parse platform.conf [21:06:06 830][Global][Inf]--Parsing burning package [21:06:06 830][Global][Inf]--Load configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp [21:06:06 830][Global][Inf]--Parse burning configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp\burn_config.xml [21:06:06 846][Global][Inf]--Get burning key [21:06:08 032][Global][Inf]--User click start button [21:06:08 032][Global][Inf]--SetErase [21:06:08 047][Global][Inf]--Enable burning 1 [21:06:08 047][Global][Inf]--Scan usb device [21:06:08 047][Global][Inf]--Aml scan WorldCup Device [21:06:08 047][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:06:08 047][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&90#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:06:08 047][Global][Inf]---->Roothub:USB#ROOT_HUB#4&37da9ca7&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:06:08 047][Global][Inf]-------->[Port0]NoDeviceConnected [21:06:08 047][Global][Inf]-------->[Port1]Other device [21:06:08 047][Global][Inf]-------->[Port2]NoDeviceConnected [21:06:08 047][Global][Inf]-------->[Port3]NoDeviceConnected [21:06:08 047][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:06:08 047][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&98#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:06:08 047][Global][Inf]---->Roothub:USB#ROOT_HUB#4&942ebd6&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:06:08 047][Global][Inf]-------->[Port0]NoDeviceConnected [21:06:08 047][Global][Inf]-------->[Port1]NoDeviceConnected [21:06:08 047][Global][Inf]-------->[Port2]NoDeviceConnected [21:06:08 047][Global][Inf]-------->[Port3]NoDeviceConnected [21:06:08 047][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:06:08 047][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&92#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:06:08 047][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&352504d9&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:06:08 047][Global][Inf]-------->[Port0]NoDeviceConnected [21:06:08 047][Global][Inf]-------->[Port1]NoDeviceConnected [21:06:08 047][Global][Inf]-------->[Port2]NoDeviceConnected [21:06:08 047][Global][Inf]-------->[Port3]NoDeviceConnected [21:06:08 047][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:06:08 047][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&9a#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:06:08 047][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&126b947d&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:06:08 047][Global][Inf]-------->[Port0]NoDeviceConnected [21:06:08 047][Global][Inf]-------->[Port1]NoDeviceConnected [21:06:08 047][Global][Inf]-------->[Port2]NoDeviceConnected [21:06:08 047][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:06:08 047][Global][Inf]--Scan USB host controller complete [21:06:08 047][Global][Inf]--Update data center with HubMap [21:06:08 047][Global][Inf]--Update hub4 device data [21:06:08 047][Global][Inf]--Update HUB4-1 [21:06:08 047][HUB4-1][Inf]--Update device path [21:06:08 047][Global][Inf]--Update HUB4-2 [21:06:08 047][HUB4-2][Inf]--Update device path [21:06:08 047][Global][Inf]--Update HUB4-3 [21:06:08 047][HUB4-3][Inf]--Update device path [21:06:08 047][Global][Inf]--Update HUB4-4 \\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:06:08 047][HUB4-4][Inf]--Update device path [21:06:08 110][HUB4-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x000008e0 [21:06:08 172][HUB4-4][Inf]--CloneImageProxy [21:06:08 172][Global][Inf]--OpenImg D:\Downloads\aml_upgrade_package.img [21:06:08 172][HUB4-4][Inf]--Connect path=Standard Enhanced PCI to USB Host Controller/P0/P3 [21:06:08 172][HUB4-4][Inf]--Start burning... [21:06:08 234][HUB4-4][Inf]--------------ERASE BOOTLOADER------------ [21:06:08 749][HUB4-4][Inf]--0-7-0-16 [21:06:08 749][HUB4-4][Inf]--Identify status success [21:06:08 749][HUB4-4][Inf]-- low_power [21:06:08 749][HUB4-4][Inf]--Low power command success [21:06:08 749][HUB4-4][Inf]--Read low power success [21:06:08 749][HUB4-4][Inf]--bootloader_is_old [21:06:08 765][HUB4-4][Inf]--Bootloader command success [21:06:08 765][HUB4-4][Err]--failed: bootloader is new [21:06:08 765][HUB4-4][Inf]--Bootloader is new [21:06:08 765][HUB4-4][Inf]-------------Download DDR.USB----------- [21:06:08 765][HUB4-4][Inf]--0-7-0-16 [21:06:08 765][HUB4-4][Inf]--Upload encrypt at 0xc8100228 [21:06:08 780][HUB4-4][Inf]--ulValue = 0xadfc318c [21:06:08 780][HUB4-4][Inf]--No need download [21:06:08 780][HUB4-4][Inf]--0-7-0-16-0-0-0-0 [21:06:08 780][HUB4-4][Inf]--No need download [21:06:08 780][HUB4-4][Inf]-- low_power [21:06:08 796][HUB4-4][Inf]--Send command success [21:06:08 796][HUB4-4][Inf]--Read command status success [21:06:08 796][HUB4-4][Inf]-------------Download meson1.dtb----------- [21:06:08 796][HUB4-4][Inf]--0-7-0-16 [21:06:08 796][HUB4-4][Inf]--Enc(0xadfc318c) [21:06:08 796][HUB4-4][Inf]-- download mem dtb normal 88064 [21:06:08 796][HUB4-4][Inf]--Send download command success [21:06:08 812][HUB4-4][Inf]--Read command status success [21:06:08 827][HUB4-4][Inf]--Transfer complete [21:06:08 827][HUB4-4][Inf]--Send download get_status command succeed [21:06:08 843][HUB4-4][Inf]--get_status success [21:06:09 358][HUB4-4][Inf]-------------ERASE FLASH----------- [21:06:09 358][HUB4-4][Inf]--disk_initial 1 [21:06:09 358][HUB4-4][Inf]--Send command success [21:06:09 982][HUB4-4][Err]--failed:[21:06:09 982][HUB4-4][Err]--Check command return failed [21:06:09 982][HUB4-4][Err]--[0x32030201]Uboot/Get result/DiskInitial error [21:06:09 982][HUB4-4][Inf]--Close device handle 0x000008e0 [21:06:11 916][Global][War]--User click stop button [21:06:11 916][Global][Inf]--Enable burning 0 [21:06:13 726][Global][Inf]--User click refresh button [21:06:15 629][Global][Inf]--User click open button [21:06:21 604][Global][Inf]--Image path D:\Downloads\MXQPRO_S905W_20171218_SD_AndroidTVBox.eu\recovery.img [21:06:21 604][Global][Inf]--OpenImg D:\Downloads\MXQPRO_S905W_20171218_SD_AndroidTVBox.eu\recovery.img [21:06:25 987][Global][Inf]--User click open button [21:06:38 904][Global][Inf]--Image path D:\s905W\s905w_atvXperience_v2FF.img [21:06:38 904][Global][Inf]--OpenImg D:\s905W\s905w_atvXperience_v2FF.img [21:06:49 216]Parse platform.conf [21:06:49 216][Global][Inf]--Parsing burning package [21:06:49 216][Global][Inf]--Load configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp [21:06:49 216][Global][Inf]--Parse burning configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp\burn_config.xml [21:06:49 231][Global][Inf]--Get burning key [21:06:50 245][Global][Inf]--User click start button [21:06:50 245][Global][Inf]--SetErase [21:06:50 245][Global][Inf]--Enable burning 1 [21:06:50 245][Global][Inf]--Scan usb device [21:06:50 245][Global][Inf]--Aml scan WorldCup Device [21:06:50 261][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:06:50 261][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&90#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:06:50 261][Global][Inf]---->Roothub:USB#ROOT_HUB#4&37da9ca7&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:06:50 261][Global][Inf]-------->[Port0]NoDeviceConnected [21:06:50 261][Global][Inf]-------->[Port1]Other device [21:06:50 261][Global][Inf]-------->[Port2]NoDeviceConnected [21:06:50 261][Global][Inf]-------->[Port3]NoDeviceConnected [21:06:50 261][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:06:50 261][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&98#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:06:50 261][Global][Inf]---->Roothub:USB#ROOT_HUB#4&942ebd6&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:06:50 261][Global][Inf]-------->[Port0]NoDeviceConnected [21:06:50 261][Global][Inf]-------->[Port1]NoDeviceConnected [21:06:50 261][Global][Inf]-------->[Port2]NoDeviceConnected [21:06:50 261][Global][Inf]-------->[Port3]NoDeviceConnected [21:06:50 261][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:06:50 261][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&92#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:06:50 261][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&352504d9&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:06:50 261][Global][Inf]-------->[Port0]NoDeviceConnected [21:06:50 261][Global][Inf]-------->[Port1]NoDeviceConnected [21:06:50 261][Global][Inf]-------->[Port2]NoDeviceConnected [21:06:50 261][Global][Inf]-------->[Port3]NoDeviceConnected [21:06:50 261][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:06:50 261][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&9a#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:06:50 261][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&126b947d&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:06:50 261][Global][Inf]-------->[Port0]NoDeviceConnected [21:06:50 261][Global][Inf]-------->[Port1]NoDeviceConnected [21:06:50 261][Global][Inf]-------->[Port2]NoDeviceConnected [21:06:50 261][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:06:50 261][Global][Inf]--Scan USB host controller complete [21:06:50 261][Global][Inf]--Update data center with HubMap [21:06:50 261][Global][Inf]--Update hub4 device data [21:06:50 261][Global][Inf]--Update HUB4-1 [21:06:50 261][HUB4-1][Inf]--Update device path [21:06:50 261][Global][Inf]--Update HUB4-2 [21:06:50 261][HUB4-2][Inf]--Update device path [21:06:50 261][Global][Inf]--Update HUB4-3 [21:06:50 261][HUB4-3][Inf]--Update device path [21:06:50 261][Global][Inf]--Update HUB4-4 \\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:06:50 261][HUB4-4][Inf]--Update device path [21:06:50 292][Global][Inf]--Burning thread HUB4-4 start [21:06:50 355][HUB4-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000578 [21:06:50 417][HUB4-4][Inf]--New CloneImageProxy [21:06:50 417][Global][Inf]--OpenImg D:\s905W\s905w_atvXperience_v2FF.img [21:06:50 417][HUB4-4][Inf]--Connect path=Standard Enhanced PCI to USB Host Controller/P0/P3 [21:06:50 417][HUB4-4][Inf]--Start burning... [21:06:50 479][HUB4-4][Inf]--------------ERASE BOOTLOADER------------ [21:06:50 994][HUB4-4][Inf]--0-7-0-16 [21:06:50 994][HUB4-4][Inf]--Identify status success [21:06:50 994][HUB4-4][Inf]-- low_power [21:06:50 994][HUB4-4][Inf]--Low power command success [21:06:50 994][HUB4-4][Inf]--Read low power success [21:06:50 994][HUB4-4][Inf]--bootloader_is_old [21:06:50 994][HUB4-4][Inf]--Bootloader command success [21:06:51 010][HUB4-4][Err]--failed: bootloader is new [21:06:51 010][HUB4-4][Inf]--Bootloader is new [21:06:51 010][HUB4-4][Inf]-------------Download DDR.USB----------- [21:06:51 010][HUB4-4][Inf]--0-7-0-16 [21:06:51 010][HUB4-4][Inf]--Upload encrypt at 0xc8100228 [21:06:51 025][HUB4-4][Inf]--ulValue = 0xadfc318c [21:06:51 025][HUB4-4][Inf]--No need download [21:06:51 025][HUB4-4][Inf]--0-7-0-16-0-0-0-0 [21:06:51 025][HUB4-4][Inf]--No need download [21:06:51 025][HUB4-4][Inf]-- low_power [21:06:51 041][HUB4-4][Inf]--Send command success [21:06:51 041][HUB4-4][Inf]--Read command status success [21:06:51 041][HUB4-4][Inf]-------------Download meson1.dtb----------- [21:06:51 041][HUB4-4][Inf]--0-7-0-16 [21:06:51 041][HUB4-4][Inf]--Enc(0xadfc318c) [21:06:51 041][HUB4-4][Inf]-- download mem dtb normal 88064 [21:06:51 041][HUB4-4][Inf]--Send download command success [21:06:51 057][HUB4-4][Inf]--Read command status success [21:06:51 072][HUB4-4][Inf]--Transfer complete [21:06:51 072][HUB4-4][Inf]--Send download get_status command succeed [21:06:51 072][HUB4-4][Inf]--get_status success [21:06:51 587][HUB4-4][Inf]-------------ERASE FLASH----------- [21:06:51 587][HUB4-4][Inf]--disk_initial 1 [21:06:51 587][HUB4-4][Inf]--Send command success [21:06:51 805][HUB4-4][Err]--failed:[21:06:51 805][HUB4-4][Err]--Check command return failed [21:06:51 821][HUB4-4][Err]--[0x32030201]Uboot/Get result/DiskInitial error [21:06:51 821][HUB4-4][Inf]--Close device handle 0x00000578 [21:06:53 163][Global][War]--User click stop button [21:06:53 163][Global][Inf]--Enable burning 0 [21:07:00 885][Global][Inf]--User click refresh button [21:07:02 959][Global][Inf]--User click start button [21:07:02 959][Global][Inf]--SetErase [21:07:02 959][Global][Inf]--Enable burning 1 [21:07:02 959][Global][Inf]--Scan usb device [21:07:02 959][Global][Inf]--Aml scan WorldCup Device [21:07:02 975][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:07:02 975][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&90#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:07:02 975][Global][Inf]---->Roothub:USB#ROOT_HUB#4&37da9ca7&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:07:02 975][Global][Inf]-------->[Port0]NoDeviceConnected [21:07:02 975][Global][Inf]-------->[Port1]Other device [21:07:02 975][Global][Inf]-------->[Port2]NoDeviceConnected [21:07:02 975][Global][Inf]-------->[Port3]NoDeviceConnected [21:07:02 975][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:07:02 975][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&98#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:07:02 975][Global][Inf]---->Roothub:USB#ROOT_HUB#4&942ebd6&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:07:02 975][Global][Inf]-------->[Port0]NoDeviceConnected [21:07:02 975][Global][Inf]-------->[Port1]NoDeviceConnected [21:07:02 975][Global][Inf]-------->[Port2]NoDeviceConnected [21:07:02 975][Global][Inf]-------->[Port3]NoDeviceConnected [21:07:02 975][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:07:02 975][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&92#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:07:02 975][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&352504d9&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:07:02 975][Global][Inf]-------->[Port0]NoDeviceConnected [21:07:02 975][Global][Inf]-------->[Port1]NoDeviceConnected [21:07:02 975][Global][Inf]-------->[Port2]NoDeviceConnected [21:07:02 975][Global][Inf]-------->[Port3]NoDeviceConnected [21:07:02 975][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:07:02 975][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&9a#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:07:02 975][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&126b947d&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:07:02 975][Global][Inf]-------->[Port0]NoDeviceConnected [21:07:02 975][Global][Inf]-------->[Port1]NoDeviceConnected [21:07:02 975][Global][Inf]-------->[Port2]NoDeviceConnected [21:07:02 991][Global][Inf]--Burning thread HUB4-4 start [21:07:02 991][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:07:02 991][Global][Inf]--Scan USB host controller complete [21:07:02 991][Global][Inf]--Update data center with HubMap [21:07:02 991][Global][Inf]--Update hub4 device data [21:07:02 991][Global][Inf]--Update HUB4-1 [21:07:02 991][HUB4-1][Inf]--Update device path [21:07:02 991][Global][Inf]--Update HUB4-2 [21:07:02 991][HUB4-2][Inf]--Update device path [21:07:02 991][Global][Inf]--Update HUB4-3 [21:07:02 991][HUB4-3][Inf]--Update device path [21:07:02 991][Global][Inf]--Update HUB4-4 \\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:07:02 991][HUB4-4][Inf]--Update device path [21:07:03 053][HUB4-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x000007f8 [21:07:03 115][HUB4-4][Inf]--Connect path=Standard Enhanced PCI to USB Host Controller/P0/P3 [21:07:03 115][HUB4-4][Inf]--Start burning... [21:07:03 178][HUB4-4][Inf]--------------ERASE BOOTLOADER------------ [21:07:03 178][HUB4-4][Inf]-------------Download DDR.USB----------- [21:07:03 178][HUB4-4][Inf]--0-7-0-16 [21:07:03 178][HUB4-4][Inf]--Upload encrypt at 0xc8100228 [21:07:03 193][HUB4-4][Inf]--ulValue = 0xadfc318c [21:07:03 193][HUB4-4][Inf]--No need download [21:07:03 193][HUB4-4][Inf]--0-7-0-16-0-0-0-0 [21:07:03 193][HUB4-4][Inf]--No need download [21:07:03 193][HUB4-4][Inf]-- low_power [21:07:03 193][HUB4-4][Inf]--Send command success [21:07:03 193][HUB4-4][Inf]--Read command status success [21:07:03 193][HUB4-4][Inf]-------------Download meson1.dtb----------- [21:07:03 193][HUB4-4][Inf]--0-7-0-16 [21:07:03 193][HUB4-4][Inf]--Enc(0xadfc318c) [21:07:03 193][HUB4-4][Inf]-- download mem dtb normal 88064 [21:07:03 193][HUB4-4][Inf]--Send download command success [21:07:03 209][HUB4-4][Inf]--Read command status success [21:07:03 225][HUB4-4][Inf]--Transfer complete [21:07:03 225][HUB4-4][Inf]--Send download get_status command succeed [21:07:03 225][HUB4-4][Inf]--get_status success [21:07:03 739][HUB4-4][Inf]-------------ERASE FLASH----------- [21:07:03 739][HUB4-4][Inf]--disk_initial 0 [21:07:03 739][HUB4-4][Inf]--Send command success [21:07:03 958][HUB4-4][Err]--failed:[21:07:03 958][HUB4-4][Err]--Check command return failed [21:07:03 958][HUB4-4][Err]--[0x32030201]Uboot/Get result/DiskInitial error [21:07:03 958][HUB4-4][Inf]--Close device handle 0x000007f8 [21:07:05 424][Global][War]--User click stop button [21:07:05 424][Global][Inf]--Enable burning 0 [21:07:09 449][Global][Inf]--User click start button [21:07:09 449][Global][Inf]--SetErase [21:07:09 449][Global][Inf]--Enable burning 1 [21:07:09 449][Global][Inf]--Scan usb device [21:07:09 449][Global][Inf]--Aml scan WorldCup Device [21:07:09 465][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:07:09 465][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&90#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:07:09 465][Global][Inf]---->Roothub:USB#ROOT_HUB#4&37da9ca7&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:07:09 465][Global][Inf]-------->[Port0]NoDeviceConnected [21:07:09 465][Global][Inf]-------->[Port1]Other device [21:07:09 465][Global][Inf]-------->[Port2]NoDeviceConnected [21:07:09 465][Global][Inf]-------->[Port3]NoDeviceConnected [21:07:09 465][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:07:09 465][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&98#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:07:09 465][Global][Inf]---->Roothub:USB#ROOT_HUB#4&942ebd6&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:07:09 465][Global][Inf]-------->[Port0]NoDeviceConnected [21:07:09 465][Global][Inf]-------->[Port1]NoDeviceConnected [21:07:09 465][Global][Inf]-------->[Port2]NoDeviceConnected [21:07:09 465][Global][Inf]-------->[Port3]NoDeviceConnected [21:07:09 465][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:07:09 465][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&92#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:07:09 465][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&352504d9&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:07:09 465][Global][Inf]-------->[Port0]NoDeviceConnected [21:07:09 465][Global][Inf]-------->[Port1]NoDeviceConnected [21:07:09 465][Global][Inf]-------->[Port2]NoDeviceConnected [21:07:09 465][Global][Inf]-------->[Port3]NoDeviceConnected [21:07:09 465][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:07:09 465][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&9a#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:07:09 465][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&126b947d&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:07:09 465][Global][Inf]-------->[Port0]NoDeviceConnected [21:07:09 465][Global][Inf]-------->[Port1]NoDeviceConnected [21:07:09 465][Global][Inf]-------->[Port2]NoDeviceConnected [21:07:09 480][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:07:09 480][Global][Inf]--Scan USB host controller complete [21:07:09 480][Global][Inf]--Update data center with HubMap [21:07:09 480][Global][Inf]--Update hub4 device data [21:07:09 480][Global][Inf]--Update HUB4-1 [21:07:09 480][HUB4-1][Inf]--Update device path [21:07:09 480][Global][Inf]--Update HUB4-2 [21:07:09 480][HUB4-2][Inf]--Update device path [21:07:09 480][Global][Inf]--Update HUB4-3 [21:07:09 480][HUB4-3][Inf]--Update device path [21:07:09 480][Global][Inf]--Update HUB4-4 \\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:07:09 480][HUB4-4][Inf]--Update device path [21:07:09 511][Global][Inf]--Burning thread HUB4-4 start [21:07:09 574][HUB4-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000220 [21:07:09 636][HUB4-4][Inf]--Connect path=Standard Enhanced PCI to USB Host Controller/P0/P3 [21:07:09 636][HUB4-4][Inf]--Start burning... [21:07:09 699][HUB4-4][Inf]--------------ERASE BOOTLOADER------------ [21:07:10 213][HUB4-4][Inf]--0-7-0-16 [21:07:10 213][HUB4-4][Inf]--Identify status success [21:07:10 213][HUB4-4][Inf]-- low_power [21:07:10 213][HUB4-4][Inf]--Low power command success [21:07:10 213][HUB4-4][Inf]--Read low power success [21:07:10 213][HUB4-4][Inf]--bootloader_is_old [21:07:10 213][HUB4-4][Inf]--Bootloader command success [21:07:10 229][HUB4-4][Err]--failed: bootloader is new [21:07:10 229][HUB4-4][Inf]--Bootloader is new [21:07:10 229][HUB4-4][Inf]-------------Download DDR.USB----------- [21:07:10 229][HUB4-4][Inf]--0-7-0-16 [21:07:10 229][HUB4-4][Inf]--Upload encrypt at 0xc8100228 [21:07:10 245][HUB4-4][Inf]--ulValue = 0xadfc318c [21:07:10 245][HUB4-4][Inf]--No need download [21:07:10 245][HUB4-4][Inf]--0-7-0-16-0-0-0-0 [21:07:10 245][HUB4-4][Inf]--No need download [21:07:10 245][HUB4-4][Inf]-- low_power [21:07:10 260][HUB4-4][Inf]--Send command success [21:07:10 260][HUB4-4][Inf]--Read command status success [21:07:10 260][HUB4-4][Inf]-------------Download meson1.dtb----------- [21:07:10 260][HUB4-4][Inf]--0-7-0-16 [21:07:10 260][HUB4-4][Inf]--Enc(0xadfc318c) [21:07:10 260][HUB4-4][Inf]-- download mem dtb normal 88064 [21:07:10 260][HUB4-4][Inf]--Send download command success [21:07:10 276][HUB4-4][Inf]--Read command status success [21:07:10 291][HUB4-4][Inf]--Transfer complete [21:07:10 291][HUB4-4][Inf]--Send download get_status command succeed [21:07:10 291][HUB4-4][Inf]--get_status success [21:07:10 806][HUB4-4][Inf]-------------ERASE FLASH----------- [21:07:10 806][HUB4-4][Inf]--disk_initial 4 [21:07:10 806][HUB4-4][Inf]--Send command success [21:07:11 040][HUB4-4][Err]--failed:[21:07:11 040][HUB4-4][Err]--Check command return failed [21:07:11 040][HUB4-4][Err]--[0x32030201]Uboot/Get result/DiskInitial error [21:07:11 040][HUB4-4][Inf]--Close device handle 0x00000220 [21:07:12 756][Global][War]--User click stop button [21:07:12 756][Global][Inf]--Enable burning 0 [21:07:14 550][Global][Inf]--User click start button [21:07:14 550][Global][Inf]--SetErase [21:07:14 550][Global][Inf]--Enable burning 1 [21:07:14 550][Global][Inf]--Scan usb device [21:07:14 550][Global][Inf]--Aml scan WorldCup Device [21:07:14 566][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:07:14 566][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&90#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:07:14 566][Global][Inf]---->Roothub:USB#ROOT_HUB#4&37da9ca7&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:07:14 566][Global][Inf]-------->[Port0]NoDeviceConnected [21:07:14 566][Global][Inf]-------->[Port1]Other device [21:07:14 566][Global][Inf]-------->[Port2]NoDeviceConnected [21:07:14 566][Global][Inf]-------->[Port3]NoDeviceConnected [21:07:14 566][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:07:14 566][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&98#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:07:14 566][Global][Inf]---->Roothub:USB#ROOT_HUB#4&942ebd6&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:07:14 566][Global][Inf]-------->[Port0]NoDeviceConnected [21:07:14 566][Global][Inf]-------->[Port1]NoDeviceConnected [21:07:14 566][Global][Inf]-------->[Port2]NoDeviceConnected [21:07:14 566][Global][Inf]-------->[Port3]NoDeviceConnected [21:07:14 566][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:07:14 566][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&92#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:07:14 566][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&352504d9&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:07:14 566][Global][Inf]-------->[Port0]NoDeviceConnected [21:07:14 566][Global][Inf]-------->[Port1]NoDeviceConnected [21:07:14 566][Global][Inf]-------->[Port2]NoDeviceConnected [21:07:14 566][Global][Inf]-------->[Port3]NoDeviceConnected [21:07:14 566][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:07:14 566][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&9a#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:07:14 566][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&126b947d&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:07:14 566][Global][Inf]-------->[Port0]NoDeviceConnected [21:07:14 566][Global][Inf]-------->[Port1]NoDeviceConnected [21:07:14 566][Global][Inf]-------->[Port2]NoDeviceConnected [21:07:14 566][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:07:14 566][Global][Inf]--Scan USB host controller complete [21:07:14 566][Global][Inf]--Update data center with HubMap [21:07:14 566][Global][Inf]--Update hub4 device data [21:07:14 566][Global][Inf]--Update HUB4-1 [21:07:14 566][HUB4-1][Inf]--Update device path [21:07:14 566][Global][Inf]--Update HUB4-2 [21:07:14 566][HUB4-2][Inf]--Update device path [21:07:14 566][Global][Inf]--Update HUB4-3 [21:07:14 566][HUB4-3][Inf]--Update device path [21:07:14 566][Global][Inf]--Update HUB4-4 \\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:07:14 566][HUB4-4][Inf]--Update device path [21:07:14 597][Global][Inf]--Burning thread HUB4-4 start [21:07:14 659][HUB4-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x0000021c [21:07:14 722][HUB4-4][Inf]--Connect path=Standard Enhanced PCI to USB Host Controller/P0/P3 [21:07:14 722][HUB4-4][Inf]--Start burning... [21:07:14 784][HUB4-4][Inf]--------------ERASE BOOTLOADER------------ [21:07:15 299][HUB4-4][Inf]--0-7-0-16 [21:07:15 299][HUB4-4][Inf]--Identify status success [21:07:15 299][HUB4-4][Inf]-- low_power [21:07:15 299][HUB4-4][Inf]--Low power command success [21:07:15 299][HUB4-4][Inf]--Read low power success [21:07:15 299][HUB4-4][Inf]--bootloader_is_old [21:07:15 299][HUB4-4][Inf]--Bootloader command success [21:07:15 315][HUB4-4][Err]--failed: bootloader is new [21:07:15 315][HUB4-4][Inf]--Bootloader is new [21:07:15 315][HUB4-4][Inf]-------------Download DDR.USB----------- [21:07:15 315][HUB4-4][Inf]--0-7-0-16 [21:07:15 315][HUB4-4][Inf]--Upload encrypt at 0xc8100228 [21:07:15 330][HUB4-4][Inf]--ulValue = 0xadfc318c [21:07:15 330][HUB4-4][Inf]--No need download [21:07:15 330][HUB4-4][Inf]--0-7-0-16-0-0-0-0 [21:07:15 330][HUB4-4][Inf]--No need download [21:07:15 330][HUB4-4][Inf]-- low_power [21:07:15 346][HUB4-4][Inf]--Send command success [21:07:15 346][HUB4-4][Inf]--Read command status success [21:07:15 346][HUB4-4][Inf]-------------Download meson1.dtb----------- [21:07:15 346][HUB4-4][Inf]--0-7-0-16 [21:07:15 346][HUB4-4][Inf]--Enc(0xadfc318c) [21:07:15 346][HUB4-4][Inf]-- download mem dtb normal 88064 [21:07:15 346][HUB4-4][Inf]--Send download command success [21:07:15 361][HUB4-4][Inf]--Read command status success [21:07:15 377][HUB4-4][Inf]--Transfer complete [21:07:15 377][HUB4-4][Inf]--Send download get_status command succeed [21:07:15 377][HUB4-4][Inf]--get_status success [21:07:15 892][HUB4-4][Inf]-------------ERASE FLASH----------- [21:07:15 892][HUB4-4][Inf]--disk_initial 4 [21:07:15 892][HUB4-4][Inf]--Send command success [21:07:16 126][HUB4-4][Err]--failed:[21:07:16 126][HUB4-4][Err]--Check command return failed [21:07:16 126][HUB4-4][Err]--[0x32030201]Uboot/Get result/DiskInitial error [21:07:16 126][HUB4-4][Inf]--Close device handle 0x0000021c [21:07:18 591][Global][War]--User click stop button [21:07:18 591][Global][Inf]--Enable burning 0 [21:07:20 993][Global][Inf]--User click start button [21:07:21 009][Global][Inf]--SetErase [21:07:21 009][Global][Inf]--Enable burning 1 [21:07:21 009][Global][Inf]--Scan usb device [21:07:21 009][Global][Inf]--Aml scan WorldCup Device [21:07:21 009][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:07:21 009][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&90#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:07:21 009][Global][Inf]---->Roothub:USB#ROOT_HUB#4&37da9ca7&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:07:21 009][Global][Inf]-------->[Port0]NoDeviceConnected [21:07:21 009][Global][Inf]-------->[Port1]Other device [21:07:21 009][Global][Inf]-------->[Port2]NoDeviceConnected [21:07:21 009][Global][Inf]-------->[Port3]NoDeviceConnected [21:07:21 009][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:07:21 009][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&98#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:07:21 009][Global][Inf]---->Roothub:USB#ROOT_HUB#4&942ebd6&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:07:21 009][Global][Inf]-------->[Port0]NoDeviceConnected [21:07:21 009][Global][Inf]-------->[Port1]NoDeviceConnected [21:07:21 009][Global][Inf]-------->[Port2]NoDeviceConnected [21:07:21 009][Global][Inf]-------->[Port3]NoDeviceConnected [21:07:21 009][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:07:21 009][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&92#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:07:21 009][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&352504d9&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:07:21 009][Global][Inf]-------->[Port0]NoDeviceConnected [21:07:21 009][Global][Inf]-------->[Port1]NoDeviceConnected [21:07:21 009][Global][Inf]-------->[Port2]NoDeviceConnected [21:07:21 009][Global][Inf]-------->[Port3]NoDeviceConnected [21:07:21 024][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:07:21 024][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&9a#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:07:21 024][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&126b947d&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:07:21 024][Global][Inf]-------->[Port0]NoDeviceConnected [21:07:21 024][Global][Inf]-------->[Port1]NoDeviceConnected [21:07:21 024][Global][Inf]-------->[Port2]NoDeviceConnected [21:07:21 024][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:07:21 024][Global][Inf]--Scan USB host controller complete [21:07:21 024][Global][Inf]--Update data center with HubMap [21:07:21 024][Global][Inf]--Update hub4 device data [21:07:21 024][Global][Inf]--Update HUB4-1 [21:07:21 024][HUB4-1][Inf]--Update device path [21:07:21 024][Global][Inf]--Update HUB4-2 [21:07:21 024][HUB4-2][Inf]--Update device path [21:07:21 024][Global][Inf]--Update HUB4-3 [21:07:21 024][HUB4-3][Inf]--Update device path [21:07:21 024][Global][Inf]--Update HUB4-4 \\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:07:21 024][HUB4-4][Inf]--Update device path [21:07:21 055][Global][Inf]--Burning thread HUB4-4 start [21:07:21 118][HUB4-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000900 [21:07:21 180][HUB4-4][Inf]--Connect path=Standard Enhanced PCI to USB Host Controller/P0/P3 [21:07:21 180][HUB4-4][Inf]--Start burning... [21:07:21 243][HUB4-4][Inf]--------------ERASE BOOTLOADER------------ [21:07:21 757][HUB4-4][Inf]--0-7-0-16 [21:07:21 757][HUB4-4][Inf]--Identify status success [21:07:21 757][HUB4-4][Inf]-- low_power [21:07:21 757][HUB4-4][Inf]--Low power command success [21:07:21 757][HUB4-4][Inf]--Read low power success [21:07:21 757][HUB4-4][Inf]--bootloader_is_old [21:07:21 757][HUB4-4][Inf]--Bootloader command success [21:07:21 773][HUB4-4][Err]--failed: bootloader is new [21:07:21 773][HUB4-4][Inf]--Bootloader is new [21:07:21 773][HUB4-4][Inf]-------------Download DDR.USB----------- [21:07:21 773][HUB4-4][Inf]--0-7-0-16 [21:07:21 773][HUB4-4][Inf]--Upload encrypt at 0xc8100228 [21:07:21 789][HUB4-4][Inf]--ulValue = 0xadfc318c [21:07:21 789][HUB4-4][Inf]--No need download [21:07:21 789][HUB4-4][Inf]--0-7-0-16-0-0-0-0 [21:07:21 789][HUB4-4][Inf]--No need download [21:07:21 789][HUB4-4][Inf]-- low_power [21:07:21 804][HUB4-4][Inf]--Send command success [21:07:21 804][HUB4-4][Inf]--Read command status success [21:07:21 804][HUB4-4][Inf]-------------Download meson1.dtb----------- [21:07:21 804][HUB4-4][Inf]--0-7-0-16 [21:07:21 804][HUB4-4][Inf]--Enc(0xadfc318c) [21:07:21 804][HUB4-4][Inf]-- download mem dtb normal 88064 [21:07:21 804][HUB4-4][Inf]--Send download command success [21:07:21 820][HUB4-4][Inf]--Read command status success [21:07:21 835][HUB4-4][Inf]--Transfer complete [21:07:21 835][HUB4-4][Inf]--Send download get_status command succeed [21:07:21 851][HUB4-4][Inf]--get_status success [21:07:22 366][HUB4-4][Inf]-------------ERASE FLASH----------- [21:07:22 366][HUB4-4][Inf]--disk_initial 1 [21:07:22 366][HUB4-4][Inf]--Send command success [21:07:22 584][HUB4-4][Err]--failed:[21:07:22 584][HUB4-4][Err]--Check command return failed [21:07:22 600][HUB4-4][Err]--[0x32030201]Uboot/Get result/DiskInitial error [21:07:22 600][HUB4-4][Inf]--Close device handle 0x00000900 [21:08:11 646][Global][Inf]--User click refresh button [21:08:11 709][Global][Inf]--Burning thread HUB4-4 start [21:08:11 771][HUB4-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000854 [21:08:11 833][HUB4-4][Inf]--Connect path=Standard Enhanced PCI to USB Host Controller/P0/P3 [21:08:11 833][HUB4-4][Inf]--Start burning... [21:08:11 896][HUB4-4][Inf]--------------ERASE BOOTLOADER------------ [21:08:12 411][HUB4-4][Inf]--0-7-0-16 [21:08:12 411][HUB4-4][Inf]--Identify status success [21:08:12 411][HUB4-4][Inf]-- low_power [21:08:12 411][HUB4-4][Inf]--Low power command success [21:08:12 411][HUB4-4][Inf]--Read low power success [21:08:12 411][HUB4-4][Inf]--bootloader_is_old [21:08:12 411][HUB4-4][Inf]--Bootloader command success [21:08:12 426][HUB4-4][Err]--failed: bootloader is new [21:08:12 426][HUB4-4][Inf]--Bootloader is new [21:08:12 426][HUB4-4][Inf]-------------Download DDR.USB----------- [21:08:12 426][HUB4-4][Inf]--0-7-0-16 [21:08:12 426][HUB4-4][Inf]--Upload encrypt at 0xc8100228 [21:08:12 442][HUB4-4][Inf]--ulValue = 0xadfc318c [21:08:12 442][HUB4-4][Inf]--No need download [21:08:12 442][HUB4-4][Inf]--0-7-0-16-0-0-0-0 [21:08:12 442][HUB4-4][Inf]--No need download [21:08:12 442][HUB4-4][Inf]-- low_power [21:08:12 457][HUB4-4][Inf]--Send command success [21:08:12 457][HUB4-4][Inf]--Read command status success [21:08:12 457][HUB4-4][Inf]-------------Download meson1.dtb----------- [21:08:12 457][HUB4-4][Inf]--0-7-0-16 [21:08:12 457][HUB4-4][Inf]--Enc(0xadfc318c) [21:08:12 457][HUB4-4][Inf]-- download mem dtb normal 88064 [21:08:12 457][HUB4-4][Inf]--Send download command success [21:08:12 473][HUB4-4][Inf]--Read command status success [21:08:12 489][HUB4-4][Inf]--Transfer complete [21:08:12 489][HUB4-4][Inf]--Send download get_status command succeed [21:08:12 489][HUB4-4][Inf]--get_status success [21:08:12 660][Global][War]--Close tool [21:08:13 003][HUB4-4][Inf]-------------ERASE FLASH----------- [21:08:13 003][HUB4-4][Inf]--disk_initial 1 [21:08:13 003][HUB4-4][Inf]--Send command success [21:08:13 222][HUB4-4][Err]--failed:[21:08:13 222][HUB4-4][Err]--Check command return failed [21:08:13 222][Global][Inf]--Burning thread HUB4-4 end run [21:08:13 222][Global][Inf]--Burning thread HUB4-4 exit [21:08:13 690][Global][War]--Controler exit [21:13:37 501][Global][Inf]--Get system Info : [21:13:37 501][Global][Inf]--Windows Version: Microsoft Windows 7, Bit: 64 [21:13:37 501][Global][Inf]--Scan usb device [21:13:37 501][Global][Inf]--Aml scan WorldCup Device [21:13:37 501][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:13:37 501][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&90#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:13:37 501][Global][Inf]---->Roothub:USB#ROOT_HUB#4&37da9ca7&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:13:37 501][Global][Inf]-------->[Port0]NoDeviceConnected [21:13:37 501][Global][Inf]-------->[Port1]Other device [21:13:37 501][Global][Inf]-------->[Port2]NoDeviceConnected [21:13:37 501][Global][Inf]-------->[Port3]NoDeviceConnected [21:13:37 501][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:13:37 501][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&98#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:13:37 501][Global][Inf]---->Roothub:USB#ROOT_HUB#4&942ebd6&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:13:37 501][Global][Inf]-------->[Port0]NoDeviceConnected [21:13:37 501][Global][Inf]-------->[Port1]NoDeviceConnected [21:13:37 501][Global][Inf]-------->[Port2]NoDeviceConnected [21:13:37 501][Global][Inf]-------->[Port3]NoDeviceConnected [21:13:37 501][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:13:37 501][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&92#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:13:37 501][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&352504d9&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:13:37 501][Global][Inf]-------->[Port0]NoDeviceConnected [21:13:37 501][Global][Inf]-------->[Port1]NoDeviceConnected [21:13:37 501][Global][Inf]-------->[Port2]NoDeviceConnected [21:13:37 501][Global][Inf]-------->[Port3]NoDeviceConnected [21:13:37 501][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:13:37 501][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&9a#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:13:37 501][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&126b947d&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:13:37 501][Global][Inf]-------->[Port0]NoDeviceConnected [21:13:37 501][Global][Inf]-------->[Port1]NoDeviceConnected [21:13:37 501][Global][Inf]-------->[Port2]NoDeviceConnected [21:13:37 501][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:13:37 501][Global][Inf]--Scan USB host controller complete [21:13:37 501][Global][Inf]--Update data center with HubMap [21:13:37 501][Global][Inf]--Insert new hub4 [21:13:37 501][Global][Inf]--Update hub4 device data [21:13:37 501][Global][Inf]--Update HUB4-1 [21:13:37 501][HUB4-1][Inf]--Update device path [21:13:37 501][Global][Inf]--Update HUB4-2 [21:13:37 501][HUB4-2][Inf]--Update device path [21:13:37 501][Global][Inf]--Update HUB4-3 [21:13:37 501][HUB4-3][Inf]--Update device path [21:13:37 501][Global][Inf]--Update HUB4-4 \\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:13:37 501][HUB4-4][Inf]--Update device path [21:13:37 517][Global][Inf]--Burning thread HUB4-4 start [21:13:37 517][Global][Inf]--Begin thread for HUB4-4 [21:13:37 517][Global][Inf]--Burning thread HUB4-4 begin run [21:13:41 807][Global][Inf]--User click open button [21:13:45 207][Global][Inf]--Image path D:\s905W\atvXperience_S905W_V2H_FINAL.img [21:13:45 207][Global][Inf]--OpenImg D:\s905W\atvXperience_S905W_V2H_FINAL.img [21:13:54 427]Parse platform.conf [21:13:54 427][Global][Inf]--Parsing burning package [21:13:54 427][Global][Inf]--Load configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp [21:13:54 427][Global][Inf]--Parse burning configuration file C:\Program Files (x86)\Amlogic\USB_Burning_Tool\temp\burn_config.xml [21:13:54 427][Global][Inf]--Get burning key [21:13:56 065][Global][Inf]--User click start button [21:13:56 081][Global][Inf]--SetErase [21:13:56 081][Global][Inf]--Enable burning 1 [21:13:56 081][Global][Inf]--Scan usb device [21:13:56 081][Global][Inf]--Aml scan WorldCup Device [21:13:56 081][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:13:56 081][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&90#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:13:56 081][Global][Inf]---->Roothub:USB#ROOT_HUB#4&37da9ca7&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:13:56 081][Global][Inf]-------->[Port0]NoDeviceConnected [21:13:56 081][Global][Inf]-------->[Port1]Other device [21:13:56 081][Global][Inf]-------->[Port2]NoDeviceConnected [21:13:56 081][Global][Inf]-------->[Port3]NoDeviceConnected [21:13:56 081][Global][Inf]--Host: Standard OpenHCD USB Host Controller [21:13:56 081][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7807&subsys_86231043&rev_39#3&11583659&0&98#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:13:56 081][Global][Inf]---->Roothub:USB#ROOT_HUB#4&942ebd6&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:13:56 081][Global][Inf]-------->[Port0]NoDeviceConnected [21:13:56 081][Global][Inf]-------->[Port1]NoDeviceConnected [21:13:56 081][Global][Inf]-------->[Port2]NoDeviceConnected [21:13:56 081][Global][Inf]-------->[Port3]NoDeviceConnected [21:13:56 081][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:13:56 081][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&92#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:13:56 081][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&352504d9&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:13:56 081][Global][Inf]-------->[Port0]NoDeviceConnected [21:13:56 081][Global][Inf]-------->[Port1]NoDeviceConnected [21:13:56 081][Global][Inf]-------->[Port2]NoDeviceConnected [21:13:56 081][Global][Inf]-------->[Port3]NoDeviceConnected [21:13:56 096][Global][Inf]--Host: Standard Enhanced PCI to USB Host Controller [21:13:56 096][Global][Inf]--DevPath:\\?\pci#ven_1022&dev_7808&subsys_86231043&rev_39#3&11583659&0&9a#{3abf6f2d-71c4-462a-8a92-1e6861e6af27} [21:13:56 096][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&126b947d&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8} [21:13:56 096][Global][Inf]-------->[Port0]NoDeviceConnected [21:13:56 096][Global][Inf]-------->[Port1]NoDeviceConnected [21:13:56 096][Global][Inf]-------->[Port2]NoDeviceConnected [21:13:56 096][Global][Inf]-------->[Port3]\\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:13:56 096][Global][Inf]--Scan USB host controller complete [21:13:56 096][Global][Inf]--Update data center with HubMap [21:13:56 096][Global][Inf]--Update hub4 device data [21:13:56 096][Global][Inf]--Update HUB4-1 [21:13:56 096][HUB4-1][Inf]--Update device path [21:13:56 096][Global][Inf]--Update HUB4-2 [21:13:56 096][HUB4-2][Inf]--Update device path [21:13:56 096][Global][Inf]--Update HUB4-3 [21:13:56 096][HUB4-3][Inf]--Update device path [21:13:56 096][Global][Inf]--Update HUB4-4 \\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} [21:13:56 096][HUB4-4][Inf]--Update device path [21:13:56 112][HUB4-4][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#5&87758cb&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x000001dc [21:13:56 174][HUB4-4][Inf]--CloneImageProxy [21:13:56 174][Global][Inf]--OpenImg D:\s905W\atvXperience_S905W_V2H_FINAL.img [21:13:56 174][HUB4-4][Inf]--Connect path=Standard Enhanced PCI to USB Host Controller/P0/P3 [21:13:56 174][HUB4-4][Inf]--Start burning... [21:13:56 237][HUB4-4][Inf]--------------ERASE BOOTLOADER------------ [21:13:56 751][HUB4-4][Inf]--0-7-0-16 [21:13:56 751][HUB4-4][Inf]--Identify status success [21:13:56 751][HUB4-4][Inf]-- low_power [21:13:56 751][HUB4-4][Inf]--Low power command success [21:13:56 751][HUB4-4][Inf]--Read low power success [21:13:56 751][HUB4-4][Inf]--bootloader_is_old [21:13:56 751][HUB4-4][Inf]--Bootloader command success [21:13:56 767][HUB4-4][Err]--failed: bootloader is new [21:13:56 767][HUB4-4][Inf]--Bootloader is new [21:13:56 767][HUB4-4][Inf]-------------Download DDR.USB----------- [21:13:56 767][HUB4-4][Inf]--0-7-0-16 [21:13:56 767][HUB4-4][Inf]--Upload encrypt at 0xc8100228 [21:13:56 783][HUB4-4][Inf]--ulValue = 0xadfc318c [21:13:56 783][HUB4-4][Inf]--No need download [21:13:56 783][HUB4-4][Inf]--0-7-0-16-0-0-0-0 [21:13:56 783][HUB4-4][Inf]--No need download [21:13:56 783][HUB4-4][Inf]-- low_power [21:13:56 798][HUB4-4][Inf]--Send command success [21:13:56 798][HUB4-4][Inf]--Read command status success [21:13:56 798][HUB4-4][Inf]-------------Download meson1.dtb----------- [21:13:56 798][HUB4-4][Inf]--0-7-0-16 [21:13:56 798][HUB4-4][Inf]--Enc(0xadfc318c) [21:13:56 798][HUB4-4][Inf]-- download mem dtb normal 88064 [21:13:56 798][HUB4-4][Inf]--Send download command success [21:13:56 814][HUB4-4][Inf]--Read command status success [21:13:56 829][HUB4-4][Inf]--Transfer complete [21:13:56 829][HUB4-4][Inf]--Send download get_status command succeed [21:13:56 829][HUB4-4][Inf]--get_status success [21:13:57 344][HUB4-4][Inf]-------------ERASE FLASH----------- [21:13:57 344][HUB4-4][Inf]--disk_initial 1 [21:13:57 344][HUB4-4][Inf]--Send command success [21:13:57 563][HUB4-4][Err]--failed:[21:13:57 563][HUB4-4][Err]--Check command return failed [21:13:57 578][HUB4-4][Err]--[0x32030201]Uboot/Get result/DiskInitial error [21:13:57 578][HUB4-4][Inf]--Close device handle 0x000001dc [21:13:59 372][Global][War]--User click stop button [21:13:59 372][Global][Inf]--Enable burning 0 [21:14:00 495][Global][Inf]--User click refresh button This is what I orignally flashed and it worked but I just see a black screen: https://forum.freaktab.com/forum/tv-player-support/amlogic-based-tv-players/s905x/others-aml-s905x/firmware-roms-tools-bx/704329-firmware-for-mxq-pro-4k-1g-8g-s905w-7-1-2 Help?!

I would try that but I tried flashing a rom for it and now I keep getting a disk error at 7%.... This is the file I'm trying to flash: https://mega.nz/#!VnhjTSYa!t6w10yz0zXHFCRugsvZJibyjISz_g7uN-jAJp9OVKZI and it's for the: amlogic s905w 1gb 8gb firmware mxq pro 4k and youtube link: I keep getting a disc write error???????????????? How long does android take to boot after a successful flash? Hi, are you there??????????????????

I ran the install.sh and it gave the error I posted above. I tried using the usb tool but my device isn't recognised and I don't know how to put it in recovery... It's the MXQ PRO S905W.

Will have a look now. do you have any idea about the dtb file? My English isn't the best and neither is the OP's. I flashed this: https://yadi.sk/d/pHxaRAs-tZiei/5.44/kernel_3.14_20180729 by icewm. Don't see the S905w in boot/media ? It's definitely emmc, just checked. mount: ddbr/install special device /dev/data does not exist. What am I doing wrong? Damnit! now android won't boot. sigh. Just put the SD card back into it and it booted. I didn't do a backup of android though... Can I get android back on it? I give up.

Hi, quick question.. I tried to use this (and did, it worked) but I can't see the actual eMMC when I type "lsblk" or within gparted. Is there a recommended kernel to use or version? So I'm getting this right... Download: Armbian_5.41_S9xxx_Debian_stretch_4.9.40_xfce_20180315.img flash to SD, go onto the TV box and make sure I update it so it boots from the SD. Now what? I can't see the eMMC that android is installed on and when I even try to install to the eMMC, it gives errors.... What do I need to do so I can remove android and just use armbian? I've read the OP: But still don't get it; where is the dtb file located? Yeah, I've flashed the img to the SD and looked in "media" it's not there....... please, someone; help!