StarSurfer

now its working. i guess the standard .config for kernel building didnt checked the networkcard for the espressobin. I checked the ddbridge and other marvell network cards and now its runnnig. Greetings StarSurfer

Now I managed to compile the DDBridge, but now no Ethernet works anymore. New image and he finds only log no WAN or otherwise.

Hello manofthesea, I have now managed to boot my self-built images. But unfortunately I found out that he doesn't compile the ddbridge for pcie. What I also don't understand is, Why aren't there any DVB Devices modules compiled in the Armbian kernel?

Hello ManoftheSea Thank you for your feedback. I could flash an old image without any problems, but unfortunately that doesn't do me any good, since the kernel modules for the DVB Media Adapter PCI are not included in the images by default. That's why I always build the OS completely and check the kernel modules DVB for PCI. Updated u-boot (2022.04) needs new default boot environment and new boot script (TODO with 2022.05 release) U-boot Script 404 Not Found

Hello everyone, i build a own Image for the EspressoBin and it wont boot. In the u-boot log shows boot.scr but on the Image himself is just a boot.scr.uimg. What is the problem ? Greetings StarSurfer Model: Marvell Armada 3720 Community Board ESPRESSOBin Net: eth0: neta@30000 Hit any key to stop autoboot: 0 starting USB... USB0: Register 2000104 NbrPorts 2 Starting the controller USB XHCI 1.00 USB1: USB EHCI 1.00 scanning bus 0 for devices... 2 USB Device(s) found scanning bus 1 for devices... 1 USB Device(s) found scanning usb for storage devices... 1 Storage Device(s) found / ** File not found /boot.scr ** ## Executing script at 06d00000 Wrong image format for "source" command /boot/ ** File not found /boot/boot.scr ** ## Executing script at 06d00000 Wrong image format for "source" command scanning bus for devices... Device 0: unknown device / ** Bad device scsi 0 ** ## Executing script at 06d00000 Wrong image format for "source" command /boot/ ** Bad device scsi 0 ** ## Executing script at 06d00000 Wrong image format for "source" command / ** Bad device mmc 1 ** ## Executing script at 06d00000 Wrong image format for "source" command /boot/ ** Bad device mmc 1 ** ## Executing script at 06d00000 Wrong image format for "source" command / Card did not respond to voltage select! ** Bad device mmc 0 ** ## Executing script at 06d00000 Wrong image format for "source" command /boot/ Card did not respond to voltage select! ** Bad device mmc 0 ** ## Executing script at 06d00000 Wrong image format for "source" command Marvell>>

Hey Guys thanks for your help. It was initially the right way to edit 10-br0.network. The mistake ansich was PiHole because Pi Hole made the IP always the same IP. I have now uninstalled Pi Hole and lo and behold, everything works now. The IP is now static. That's what it looks like now. [Match] Name = br0 [Network] Address = 192.168.179.23 / 24 Gateway = 192.168.179.1 DNS = 192.168.179.1 # DNS = 8.8.8.8 Thanks for your help :-) Have a nice weekend.

Hello everybody and a nice evening. I have two EspressoBin 1GB at home and try desperately to change the static IP. No matter if in the armbian-config or under /etc/systemd/network/10-br0.network I just can not get it. Does anyone else have any advice? I've already tried Google and the forum search but any attempt fails that the IP is constantly jumping or that I no longer get a gateway. Armbian is a great distro and nobody has gotten the kernel to work so far. I hope you can help me. Alone a nice evening :-) LG StarSurfer