anuj9122

Hi, I have 5 cubieboards 1. I want to give to my employees, so i decided to install desktop ambian installed on nand (neither sata nor sd card). Q) Why not installed on sata and sd card? Ans) firstly the work is into excel only (data entry work). Secondly i dont want to give more space because they start downloading songs, game, videos, torrent and movies.So get slow speed of internet . Thirdly save money to buy sd cards and sata hdd. My questions are:- 1) Where i get the old desktop image file to install it into nand? 2) I have this file armbian_5.25_cubieboard_ubuntu_xenial_default_3.4.113_desktop.7z. I find out in my old backup hdd. i was download this file through armbian website in 2017.The problem is this is .7z file. when i start extracting. It ask me the password. I dont know the password. If you know the password please tell me. 3) Yeasterday i start building armbian but i cannt get nand installation file.If you tell me the option selection i build it myself. I have 5 cubieboard 1 (client) and 1 server.My client pcs is in us and sever in India. I want to upload abc folder from each client pc to server pc1, pc2,pc3,pc4,pc5 folder individually at 7pm everyday after that client pc should shutdown.While uploading to server older folder and files in server pc1, pc2,pc3,pc4,pc5 will be replace from abc client folders everyday when start uploading. How is it possible?

Thanks for reply. I am newbie so for knowledge why dont change frequency? As i put large heat sink and power supply? This is root@projectok:~# cpufreq-info cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009 Report errors and bugs to cpufreq@vger.kernel.org, please. analyzing CPU 0: driver: cpufreq-dt CPUs which run at the same hardware frequency: 0 CPUs which need to have their frequency coordinated by software: 0 maximum transition latency: 244 us. hardware limits: 624 MHz - 1.01 GHz available frequency steps: 624 MHz, 864 MHz, 912 MHz, 1.01 GHz available cpufreq governors: conservative, userspace, powersave, ondemand, performance, schedutil current policy: frequency should be within 624 MHz and 1.01 GHz. The governor "performance" may decide which speed to use within this range. current CPU frequency is 1.01 GHz (asserted by call to hardware). cpufreq stats: 624 MHz:0.21%, 864 MHz:0.07%, 912 MHz:0.05%, 1.01 GHz:99.67% (67) root@projectok:~# nano /etc/default/cpufrequtils

My last question. How to increase cpu frequency?.I already put large heat sink and 5 volt 5 amps power supply. i am using cubieboard 1.

Thanks for reply but these are armbian question. let me tell you my /var/log goes full when i find out i get this location /var/log/journal/5dc2e9f851914ebd9bf0e4b296b9f7f5 . As much as i know journal is related to OS. When i put both domain name in resolv.conf then restart it it revert back to 192.168.1.1 I am newbie to linux download-2020.2.18_20.11.35-root-(projectok.com).tar.gz

I have one more question. i have two domains projectok.com and jobstuffs.com. i can access both domain from internet. I also want to use both domains in intranet. Please tell me how to do this?

yes. i am running

Please check this NOK: (28, 'No space left on device') error: error running non-shared postrotate script for /var/log.hdd/fail2ban.log of '/var/log.hdd/fail2ban.log ' SARG: Unknown option resolve_ip This may be clue

root@projectok:~# ps -ef | grep -i sarg root 2849 2835 0 22:48 pts/0 00:00:00 grep --color=auto -i sarg

NOK: (28, 'No space left on device') error: error running non-shared postrotate script for /var/log.hdd/fail2ban.log of '/var/log.hdd/fail2ban.log ' SARG: Unknown option resolve_ip

SARG: Unknown option resolve_ip

I got this file in this location /var/log/journal//5dc2e9f851914ebd9bf0e4b296b9f7f5

how to find the issue?

Thanks for reply. I am newbie.Please tell me how to solve.

/var/log goes full every 15 min when i remove.Please see attachment download-2020.2.18_20.11.35-root-(projectok.com).tar.gz

Hello This is my external domian hmail.hmail.us. Its working from outside the network.I want it works in internal network.Please see hosts file. hosts

Hi Coming back to resolv.conf file.I dont have static ip address so i am using dns ( freednsafraid ) .So my outer link is hmail.hmail.us. I want i can also access from internal network.So please guide me. When i enter hmail.hmail.us into browser i get the router login page that is 192.168.1.1. But i want to get this ip 192.168.1.55.

Hello Member Please reply cubieboard 1 stuck when installed boot from nand, system on sata. Only show stable lights green and red. Screen black.Could you please guide me?

Hello Igor cubieboard 1 stuck when installed boot from nand, system on sata. Only show stable lights green and red. Screen black.Could you please guide me?

Hi igor. Could you please tell me which options i need to choose to build boot from nand ,system on sata I am using this option but i cannt find this option to install boot from nand ,system on sata full os image for flashing --> show a kernal configuration menu before compilation --> show csc/wip/eos/tvb --> i understand and agree --> cubieboard --> next --> xenial --> image with console interface (server) --> standard image for console interface

Hi Igor I am waiting for your reply. Can i increase cpu frequency to 1.1 ,1.2 ,1.3 or 1.4 ghz? I already put heat sink and have 5 volt 5 amp power supply that is currently connected to cubieboard 1

Could you please build for me? In this https://docs.armbian.com/Developer-Guide_Build-Preparation/ It only write support bionic

Thanks for reply. I will come back to ports.Please tell me where to find new image of cubieboard one. I need boot from nand - system on sata

Thanks for replying Your address 192.168.1.2 is it delivry by DHCP or it's a static address ? -> DHCP by router but in cubieboard use static. The first : user/client web tools (wan) on port 80 and 443 The second : administrative web tools (lan) on port 8080 -> Port 80 and 443 is blocked my isp so i want to use 8000 and 8001 With the firewall (iptable or iptable gui ) open on wan only port 80 and 443 -.> not installed any firewall by me.Also checked in webmin no firewall installed.Does armbian comes with firewall? How to check firewall installed? Port 80 and 443 is blocked by isp so i want to use 8000 and 8001 (ssl).For dns 53 port is open and dns is working fine.Checked by all online tools.When i put ns1.abc.com and ns2.abc.com in bigrock.com , website is not working.I think port 80 is blocked so i want to use 8000 instead of 80. Please guide me with commands to use to do this all

A fatal error has been detected by the Java Runtime Environment: # # SIGILL (0x4) at pc=0xb40aba7c, pid=320, tid=327 # # JRE version: OpenJDK Runtime Environment (11.0.4+11) (build 11.0.4+11-post-Ubuntu-1ubuntu218.04.3) # Java VM: OpenJDK Server VM (11.0.4+11-post-Ubuntu-1ubuntu218.04.3, mixed mode, serial gc, linux-) # Problematic frame: # J 28 c2 java.lang.StringUTF16.toLowerCase(Ljava/lang/String;[BLjava/util/Locale;)Ljava/lang/String; java.base@11.0.4 (296 bytes) @ 0xb40aba7c [0xb40ab880+0x000001fc] # # No core dump will be written. Core dumps have been disabled. To enable core dumping, try "ulimit -c unlimited" before starting Java again # # An error report file with more information is saved as: # //hs_err_pid320.log Could not load hsdis-arm.so; library not loadable; PrintAssembly is disabled # # If you would like to submit a bug report, please visit: # https://bugs.launchpad.net/ubuntu/+source/openjdk-lts # /var/lib/dpkg/info/ca-certificates-java.postinst: line 76: 318 Done find /etc/ssl/certs -name \*.pem 319 | while read filename; do alias=$(basename $filename .pem | tr A-Z a-z | tr -cs a-z0-9 _); alias=${alias%*_}; if [ -n "$FIXOLD" ]; then echo "-${alias}"; echo "-${alias}_pem"; fi; echo "+${filename}"; done 320 Aborted | java -Xmx64m -jar $JAR -storepass "$storepass" dpkg: error processing package ca-certificates-java (--configure): installed ca-certificates-java package post-installation script subprocess returned error exit status 134 dpkg: dependency problems prevent configuration of openjdk-11-jre-headless:armhf: openjdk-11-jre-headless:armhf depends on ca-certificates-java; however: Package ca-certificates-java is not configured yet. dpkg: error processing package openjdk-11-jre-headless:armhf (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of openjdk-11-jdk-headless:armhf: openjdk-11-jdk-headless:armhf depends on openjdk-11-jre-headless (= 11.0.4+11-1ubuntu2~18.04.3); however: Package openjdk-11-jre-headless:armhf is not configured yet. dpkg: error processing package openjdk-11-jdk-headless:armhf (--configure): dependency problems - leaving unconfigured Setting up libio-socket-ssl-perl (2.060-3~ubuntu18.04.1) ... dpkg: dependency problems prevent configuration of openjdk-11-jdk:armhf: openjdk-11-jdk:armhf depends on openjdk-11-jdk-headless (= 11.0.4+11-1ubuntu2~18.04.3); however: Package openjdk-11-jdk-headless:armhf is not configured yet. dpkg: error processing package openjdk-11-jdk:armhf (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of default-jdk: default-jdk depends on openjdk-11-jdk; however: Package openjdk-11-jdk:armhf is not configured yet. dpkg: error processing package default-jdk (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of default-jdk-headless: default-jdk-headless depends on openjdk-11-jdk-headless; however: Package openjdk-11-jdk-headless:armhf is not configured yet. dpkg: error processing package default-jdk-headless (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of openjdk-11-jre:armhf: openjdk-11-jre:armhf depends on openjdk-11-jre-headless (= 11.0.4+11-1ubuntu2~18.04.3); however: Package openjdk-11-jre-headless:armhf is not configured yet. dpkg: error processing package openjdk-11-jre:armhf (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of default-jre: default-jre depends on openjdk-11-jre; however: Package openjdk-11-jre:armhf is not configured yet. dpkg: error processing package default-jre (--configure): dependency problems - leaving unconfigured Processing triggers for man-db (2.8.3-2ubuntu0.1) ... Processing triggers for ca-certificates (20180409) ... Updating certificates in /etc/ssl/certs... 0 added, 0 removed; done. Running hooks in /etc/ca-certificates/update.d... done. done. Errors were encountered while processing: ca-certificates-java openjdk-11-jre-headless:armhf openjdk-11-jdk-headless:armhf openjdk-11-jdk:armhf default-jdk default-jdk-headless openjdk-11-jre:armhf default-jre E: Sub-process /usr/bin/dpkg returned an error code (1)

cannt change to static ip.Please see attachment. I am using this command sudo nmtui with the help of this url https://docs.armbian.com/User-Guide_Getting-Started/ 2nd error i get in ca-certificates-java.Please see attachment.