• Content Count

  • Joined

  • Last visited

Everything posted by karlitos

  1. Hi @tobogdan, are you sure, the dtoverlay= line apply for the Pine64/Armbian ? I found it mentioned only in connecntion with raspberryPi. I also checked the /boot/dtb directory and did not found any .dtb file related to the goodix driver. I am actually quite happy now with the workaround. Since the device id might change between reboots I was more successfull using xinput set-prop 'pointer:Goodix Capacitive TouchScreen' 122 -1 0 1 0 -1 1 0 0 1 which seems to be consistent
  2. Hello @tobogdan I have exact the same problem. Debian Buster 5.10.21-sunxi64 - installed minimal Xorg, the touch is inverted in both directions. Also it seems, that scrollingis messed up as well. Did you find any solution ? I found at least a workaround by inverting the axis in the libinput driver You may need install xinput for this. $ xinput list ⎡ Virtual core pointer id=2 [master pointer (3)] ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)] ⎜ ↳ Logitech M720 Triathlon id=6 [slave pointer (2)] ⎜
  3. Thanks for the suggestion, I will hold the brocken package back. Does the 21.02.1. version boot ?
  4. Hello, I just stumbled upon this topic, after I spend few hours trying to run the current Armbian (buster) I downloaded from the Sopine64 Product page. I got the same error: Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. Begin: Running /scripts/local-block ... done. done. Gave up waiting for root file system device. Common problems: - Boot args (cat /proc/cmdline) - Check rootdelay= (did the system wait long enough?) - Missing modules (cat /proc/modules; ls /dev) ALERT! UUID=b9866ace-f260-437c-9794-8e1a363a3c71 does no
  5. Thank you @Gavinb for your suggestion - you were right! After pulling out the board from the enclosure I realized, on end of the the flat-ribbon LCD was connected upside down (the part on the extension PCB). But this just opened a new can of worms After plugging everything together I inserted the DC barrel jack (original 5V 3A power supply) and then the LED goes on only for 1-2 seconds and then goes off. The serial output always goes only so far: U-Boot SPL 2019.04-armbian (Feb 02 2020 - 16:05:24 +0100) DRAM: 2048 MiB Trying to boot from MMC2 NOTICE: BL3-1: Running on A64/H6
  6. I had also issues when flashing an Armbian image to emmc module using the USB-adapter. I almost suggested my Pine A64-LTS or the emmc was not working properly. The solution was to flash an image to SD-card, boot from SD with module connected to the board and use the nand-sata-install script which copies a bootable copy of the system to the emmc module. Afterwards I powered-off the board, removed the SD card and the board was booting from the module You should also verify if the emmc module is recognized - there should be emmcblk0 and emmcblk1 device in /dev - one for the SD card an
  7. So booting from SD card and doing nand-sata-install solved my problem with the eMMC My Pine A64-LTS runs from an eMMC module now But still no luck regarding the LCD. I did dmesg | grep dsi and here is the output [ 8.577279] sun4i-drm display-engine: failed to bind 1ca0000.dsi (ops 0xffff000010b79400): -517 [ 8.592781] sun6i-mipi-dsi 1ca0000.dsi: Couldn't register our component [ 8.609448] sun4i-drm display-engine: failed to bind 1ca0000.dsi (ops 0xffff000010b79400): -517 [ 8.610876] sun6i-mipi-dsi 1ca0000.dsi: Couldn't register our component [ 8.641097] sun4i-d
  8. @Gavinb Many thanks for your reply. I actually created an Image without the desktop environment since I am going to create a minimal kiosk-browser environment for OpenHab. I already created new user since the board is connected to LCD screen over HDMI. Can this be the cause ? I actually never tried to boot with unplugged HDMI Also I added the pine64_lcd=on to armbianEnv.txt, and gt9xxf_ts to /etc/modules
  9. @Learnincurve You were right! I was actually able to build an image over the last weekend, since @Gavinb was so kind and responded to my personal message. I was able to boot the image on my Pine A64 LTS using a SD card, still not able to see anything on the display. Currently I am trying also to figure out how to boot from eMMC. I hope I will find time this evening to attach a serial cable and look on the booting process. Kernel 5.6-rc1 was released two days ago, I wonder if there is possibility to try it using the armbian build-tool
  10. I am sorry for posting in this older thread, but it is actually the first relevant google search result. I am trying to create an flashable image for my A64-LTS board with LCD/DSI support. more to it here. The script always fails with the Image build error : Unable to locate package armbian-firmware error. My setup is: current Virtualbox with Ubuntu 18.04. minimal image tweaked build script from https://github.com/GavinBa/build.git containing all the necessary fixes for working LCD and touch What I do: ./compile.sh
  11. I tried today several times to compile an image, but the script always ends with: Image build error : Unable to locate package armbian-firmware My setup: current Virtualbox with Ubuntu 18.04. minimal image cloned the https://github.com/GavinBa/build.git repository ./compile.sh LIB_TAG=v9-a64-dsi then selected: Full OS image for flashing, Don't change the kernel configuration, Target board: pine64so, Kernel next (Mainline), Target OS: stretch Debian 9, Image with console interface I tried to google for the above error message, but not lock so far
  12. Great! Thank you so much fr your effort! I would love to try. I assume I can try the build script from https://github.com/GavinBa/build/tree/v9-a64-dsi and should be using the https://github.com/amarula/linux-amarula/tree/v9-a64-dsi kernel ? How do I tell the script to use the kernel ? I tried to find the answer in https://docs.armbian.com/Developer-Guide_Build-Options/ but no luck
  13. @Gavinb Hello Gavin, I'd like to ask about your progress with the build-script ? Could you resolve your issues with the i2c/touch ? I was tracking the progress in you repository, the latest changes are about 2 weeks old.
  14. I am also super excited about this news. I have on original Pine A64 board from the kickstarter campaign and one Pine A64 (+) LTS, I hope I would be able to get the LCD running on both of them. Is there some output from i2cdetect ? I2C bus locked can be sometimes caused by too high bitrate.
  15. Hello, any updates on this ? @Gavinb How was your experience with the v9-a64-dsi kernel ?