ginggs
-
Posts
5 -
Joined
-
Last visited
Content Type
Forums
Store
Crowdfunding
Applications
Events
Raffles
Community Map
Posts posted by ginggs
-
-
9 minutes ago, Igor said:
If its not here https://docs.armbian.com/Release_Changelog/ then it was not specifically fixed.I don't see any changes for 19.11.8 there.
-
I recently received some updates via apt; armbian-firmware, linux-u-boot-tinkerboard-current, etc. all upgraded from 19.11.3.346 to 19.11.8.
I don't see any change in CPU frequency.
If the issue was fixed, would it be fixed for me by an apt update, or would I need to start from a new Armbian image?
-
Thanks for yours answers.
1 hour ago, TonyMac32 said:May I add that I believe this is being corrected upstream for the Tinker Board, I saw it mentioned on the mailing list.
Is that Linux or Asus upstream?
-
Armbianmonitor:
Hi!
I seem to have the same problem described here:
I have an Asus Tinkerboard, not the S version.
Today I upgraded from the latest Asus TinkerOS image:
20190821-tinker-board-linaro-stretch-alip-v2.0.11.img
to:
Armbian_19.11.3.346_Tinkerboard_buster_current_5.3.15_minimal.img
I notice that my maximum CPU frequency has dropped from 1.80GHz to 1.61GHz.
cpufreq-info now reports:
$ cpufreq-info
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
driver: cpufreq-dt
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 0 1 2 3
maximum transition latency: 115 us.
hardware limits: 126 MHz - 1.61 GHz...
and my cpufrequtils config is unmodified:
$ cat /etc/default/cpufrequtils
ENABLE=true
MIN_SPEED=600000
MAX_SPEED=1900000
GOVERNOR=ondemandWhereas on TinkerOS, cpufreq-info reported:
$ cpufreq-info
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
driver: cpufreq-dt
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 0 1 2 3
maximum transition latency: 115 us.
hardware limits: 126 MHz - 1.80 GHz...
Is this something I can change locally, or does something need to change in the Armbian image?
Tinkerboard max CPU freq limited to 1.61GHz
in Tinkerboard
Posted
I've just upgraded and cpufreq-info now reports:
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
driver: cpufreq-dt
CPUs which run at the same hardware frequency: 0 1 2 3
CPUs which need to have their frequency coordinated by software: 0 1 2 3
maximum transition latency: 132 us.
hardware limits: 126 MHz - 1.80 GHz
...
Thanks @TonyMac32 !