GUS

story goes on flashed this firmware to the device NAND: # ~/minix7/Linux_Upgrade_Tool_v1.49/upgrade_tool uf ./x7-rk3188-250.img Program Data in /root/.config/upgrade_tool Loading firmware... Support Type:RK31 FW Ver:4.4.02 FW Time:2015-12-21 18:12:34 Loader ver:2.13 Loader Time:2014-03-03 18:08:38 Upgrade firmware ok. result: no LED, no HDMI signal. USB LAN adapter LEDs are on, but after 10 min no DHCP request appeared... SDCard partition remained the same..haven't been resized... # fdisk -l /dev/sdb Disk /dev/sdb: 29.72 GiB, 31914983424 bytes, 62333952 sectors Disk model: Storage Device Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x698ab215 Device Boot Start End Sectors Size Id Type /dev/sdb1 32768 2531327 2498560 1.2G 83 Linux

Hi, thanks for suggestion, I have tried this image: Armbian_21.11.0-trunk_Rk3188_hirsute_current_5.10.63.img Does not boot... no hdmi, no led...if I remove SD card, Wasser Android starts/boots OK! I even connected external USB LAN and waited ~15 min... Partitions on Minix NAND: ./upgrade_tool PL Program Data in /root/.config/upgrade_tool Partition Info(parameter): NO LBA Size Name 01 0x00002000 0x00002000 misc 02 0x00004000 0x00008000 kernel 03 0x0000c000 0x00008000 boot 04 0x00014000 0x0000c000 recovery 05 0x00020000 0x00100000 backup 06 0x00120000 0x00040000 cache 07 0x00160000 0x00400000 userdata 08 0x00560000 0x00002000 kpanic 09 0x00562000 0x00100000 system 10 0x00662000 0xffffffff user UpgradeFirmware: ./upgrade_tool UF ./wasser-3.0.6-minix-x7-rk3188/wasser-3.0.6-minix-x7-rk3188.img Program Data in /root/.config/upgrade_tool Loading firmware... Support Type:RK31 FW Ver:5.1.01 FW Time:2017-02-12 13:15:23 Loader ver:2.19 Loader Time:2014-10-29 17:47:37 Upgrade firmware ok. MicroSD: # fdisk -l /dev/sdb Disk /dev/sdb: 29.72 GiB, 31914983424 bytes, 62333952 sectors Disk model: Storage Device Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x698ab215 Device Boot Start End Sectors Size Id Type /dev/sdb1 32768 2531327 2498560 1.2G 83 Linux boot dir list on SDCard; FS ext4 # ll total 27312 -rw-r--r-- 1 root root 1536 Sep 8 2021 armbian_first_run.txt -rw-r--r-- 1 root root 38518 Sep 8 2021 boot.bmp -rw-r--r-- 1 root root 155492 Sep 8 2021 config-5.10.63-rk3188 drwxr-xr-x 2 root root 4096 Sep 8 2021 dtb drwxrwxr-x 2 root root 4096 Sep 8 2021 extlinux -rw-r--r-- 1 root root 8864809 Sep 8 2021 initrd.img-5.10.63-rk3188 -rw-r--r-- 1 root root 3209432 Sep 8 2021 System.map-5.10.63-rk3188 lrwxrwxrwx 1 root root 22 Sep 8 2021 uInitrd -> uInitrd-5.10.63-rk3188 -rw-r--r-- 1 root root 8864873 Sep 8 2021 uInitrd-5.10.63-rk3188 -rwxr-xr-x 1 root root 6810096 Sep 8 2021 vmlinuz-5.10.63-rk3188 lrwxrwxrwx 1 root root 22 Sep 8 2021 zImage -> vmlinuz-5.10.63-rk3188 # cat ./extlinux/extlinux.conf LABEL Armbian LINUX /boot/zImage INITRD /boot/uInitrd FDT /boot/dtb/rk3188-ugoos-ut2.dtb APPEND root=UUID=93ab2d09-92a4-4aec-bc9f-1247a2b6b211 console=uart8250,mmio32,0x20064000 console=tty0 coherent_pool=2M video=HDMI-A-1:e rootflags=data=writeback rw no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0 bootsplash.bootfile=bootsplash.armbian maybe I need to flash another boot file ? from Firmware: X7-rk3188-250.7z ? or another Loader ?

hi, thanks for sharing. I was struggling with this device several days, completly erased NAND and partitions on WIN 10 and USB3.0 ports DOES NOT WORK, so I switched to linux and USB2.0 with update_tool binary from RockChip : http://opensource.rock-chips.com/wiki_Upgradetool I was able to flash: wasser-3.0.6-minix-x7-rk3188.img But now, if I flash (used USBImager, win32imager, Balena...no sense) Armbian_22.02.0-trunk_Rk3188_bullseye_current_5.10.96.img to Microsd, (SanDisk Ultra 32G Class10 ) I can not boot...since I got always power on jumper, it should start , but blue led does not power on... If I remove microSD , Wasser Android starts/boots OK... Recovery is OK:

Hi, thank you for suggestion. Seems like when I installed to Nand/eMMC, something is deleted from internal storage and now device does not start when SD card is inserted... Yesterday I spend all day trying to flash wasser firmware using rockchip bach tool, but did not get success yet...

Thank you for confirmation! How can I flash wasser firmware? Links here are dead: https://forum.freaktab.com/node/10017 there 2 files needs to be installed via recovery mode ? (apply update from storage) Firmware download: wasser-3.0.6-neox7 kernel download: kernel-cpu1800-gpu798-ddr800.7z Currently I got screen from Freaktab 1.4 stuck when I remove SD card and boot Thank you!

Hi All, I was able to boot from SD card, after writing "Armbian_22.02.0-trunk_Rk3188_bullseye_current_5.10.96.img" to SD with usbimager as it suggested here: https://docs.armbian.com/User-Guide_Getting-Started/ Using external USB-LAN 1Gb adapter (https://www.realtek.com/en/component/zoo/category/network-interface-controllers-10-100-1000m-gigabit-ethernet-usb-3-0-software) was able to fetch "apt update && apt upgrade -y" ; then installed to NAND/eMMC, but now with inserted SD card auto-power on does not work (jumper inside set to always-on) any suggestions what is wrong ? Thank you in advance!

Hi All, may I ask for a guidance how to install Armbian on fresh Minix Neo X7 (Rockchip RK3188 Quad Core Cortex A9 1.6GHz CPU) Thanks in advance!

thank you! I tried on Minix X6, did not work...does not boot.

Hi, I manage Minix X6 only via SSH. I did play with tdb files in the beginning, but seems HDMI of Minix is not supported...etc... if you can ping host via ethernet, then wait, SSH service comes up later, especially on first boot.

Благодарствую!

Hi, where I can get latest *.img for S805 ? I got Minix X6, currently running "Armbian_5.67_Aml-s805_Debian_stretch_default_3.10.108_20181207.img"