Jump to content

StaLeWaR

Members
 View Profile  See their activity

  • Posts

    39

  • Joined

  • Last visited

 Content Type 

Everything posted by StaLeWaR

  1. StaLeWaR
    I would be grateful if you write about your attempts
  2. StaLeWaR
    @fatboyatdesk There are the results?
  3. StaLeWaR
    how so? Last documentation H3 says that PA06 no pwm. It's a lie?
  4. StaLeWaR
    It would be cool!!! I think if it will be possible to control neopixel. (ws2811, ws2812)
  5. StaLeWaR
    Unfortunately I have not seen such a library. A small community in the H3 devices.
  6. StaLeWaR
    Our links are not the same. I made good use of it on an orange pi pÑ https://github.com/StaLeWaR/OPi-Fan I have information that works on all PA *, PG *. On the PC *, PD * - not running. But I have not checked
  7. StaLeWaR
    I know only one which employs an interrupt https://github.com/WereCatf/WiringOP I use it
  8. StaLeWaR
    as far as I remember this is not possible because of the design of boards. Maybe I'm wrong
  9. StaLeWaR
    thank you for help!
  10. StaLeWaR
    @zador.blood.stained Tell me solution to restart button
  11. StaLeWaR
    unfortunately it did not help
  12. StaLeWaR
    What else can I do? Is there a way to specify in compile.sh you need to use version 4.6 kernel?
  13. StaLeWaR
    Today, I have built a new image I use Xenial with gcc 5.2 as recommended @tkaiser But it has not given a positive result.
  14. StaLeWaR
    @Igor Thank you for your link. Probably the best option eMMC
  15. StaLeWaR
    @tkaiser - Proposes to replace the build host Xenial with new version gcc ? I would like to build your own vanilla kernel for Orange PI One
  16. StaLeWaR
    by the way, I wanted to know - what load faster with emmc or sdcard? there is a difference?
  17. StaLeWaR
    No. I used Ubuntu Trusty 14.04 x64. It is also recommended in Building Armbian Docs. root@build-armbian:/# uname -a Linux build-armbian 4.2.0-27-generic #32~14.04.1-Ubuntu SMP Fri Jan 22 15:32:26 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux
  18. StaLeWaR
    I have not even thought. Unfortunately I have not found how to choose the correct kernel version compile.sh. It can be done?
  19. StaLeWaR
    I tested with my Orange Pi One. Unfortunately it does not work. And the system freezes I double-checked.
  20. StaLeWaR
    I think to connect the console cable And to see that writing board
  21. StaLeWaR
    Today I made a cooling radiator for Orange Pi One. I used a heat sink on the motherboard. I used the thermal paste GD900 and a little glue. One drop at angles. Now idle temperature of 26 °С In load mode: root@orangepione:~# sysbench --num-threads=4 --test=cpu --cpu-max-prime=20000 run temperature of 42-43 °С I think this is a great result !!!
  22. StaLeWaR
    I can not present what it is necessary for the purposes ?
  23. StaLeWaR
    Thank you for your help!
  24. StaLeWaR
    I did not find
  25. StaLeWaR
    Wow What is then the algorithm counting pins? PA = 0 PB = 1 PC = 2 PD = 3 PE = 4 PF = 5 PG = 6 Physical pin 18 this PC07 pin H3 PC07 = 32*2 + 7 = 71 This is the correct understanding?
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines

  I accept