• Content Count

  • Joined

  • Last visited

About apollon77

  • Rank
    Elite member

Profile Information

  • Gender
  • Location
    Karlsruhe, Germany
  • Interests
    Home-Automation, IoT

Recent Profile Visitors

913 profile views
  1. Ok, reboot worked :-) ingof@usb3:~$ uname -a Linux usb3 5.8.5-sunxi #trunk SMP Tue Sep 1 11:24:23 CEST 2020 armv7l GNU/Linux Will test USBIP tomorow morning
  2. Ok tried ... ingof@usb3:~/kernel-fix$ sudo apt install make gcc libc6-dev bison flex libssl-dev Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt --fix-broken install' to correct these. The following packages have unmet dependencies: bison : Depends: m4 but it is not going to be installed Depends: libbison-dev (= 2:3.3.2.dfsg-1) but it is not going to be installed flex : Depends: m4 but it is not going to be installed gcc : Depends: cpp (= 4:8.3.0-1) but it is not going to be installed Depend
  3. Hm ... headers do not want to install ... Preparing to unpack linux-dtb-current-sunxi_20.08.0-trunk_armhf.deb ... Unpacking linux-dtb-current-sunxi (20.08.0-trunk) over (20.08) ... Selecting previously unselected package linux-headers-current-sunxi. Preparing to unpack linux-headers-current-sunxi_20.08.0-trunk_armhf.deb ... Unpacking linux-headers-current-sunxi (20.08.0-trunk) ... Preparing to unpack linux-image-current-sunxi_20.08.0-trunk_armhf.deb ... update-initramfs: Deleting /boot/initrd.img-5.7.15-sunxi Removing obsolete file uInitrd-5.7.15-sunxi Unpacking linux-image-current-
  4. Do you have a short info how to do? Do I need to fetch all of them? Or only the armhf ones? ANd then install them with dpkg -i directly?
  5. So true ;-) I'm invested myself very deep in a Smart Home project (ioBroker) as one of the Core Developers (mainly Node.js based) ... so I know exactly what you mean ;-)
  6. Awesome ... I can wait some days ... To be clear: With "Add a patch" you mean you do or I should do? If me then I need to know how :-) Thank you for this incredible fast support
  7. Thank you for your answer. When I read "I just compiled 5.8.5 with your patch and usbip works correctly, thx!" (from the linked issue) again Im not sure that it is on 5.8.5 ... I read it more like "when I compile 5.8.5 with that patch it works" ,.. so 5.8.5 is not the solution unless we do a custom build with this patch :-( So downgrading to 5.6 is more forward or ?! When checking there are some older version of the linux-image-current-sunxi package available but I can not find out which kern is in there :-( ingof@usb3:~$ apt-cache policy linux-image-cur
  8. Hey ... Ok googling more brought me to this ... https://bugzilla.kernel.org/show_bug.cgi?id=208267 And yes ... Proxmox is on kernel 5.4 and armbian on 5.7 ... according to this I could go down to kernel 5.6 or wait for 5.8.5+ ... Any instructions on how to go down to kernel 5.6?
  9. Hi, I normally use Proxmox on Intel Nucs (also Buster based) and also had here usbip with some USB sticks on a USB hub. Now I decided to split that up a bit and so I got some ZeroPi devices and wanted to use them as USBIP hosts kind of. So I installed the buster image and also added usbip_host module to /etc/modules. The devices are seen by the Linux on the ZeroPi in general and also /usr/sbin/usbip list -l lists them successfully. Here the dmesg output too: [ 350.174305] usb 4-1: new high-speed USB device number 6 using ehci-platform [ 350.331127] usb
  10. I use one of my Cubietrucks to operate two IR-read/write heads to read out powermeters. Sometimes some kind of error happends and the device get's disconnected (not physically, but from system): dmesg output: [434913.929842] ohci-platform 1c14400.usb: frame counter not updating; disabled [434913.939546] ohci-platform 1c14400.usb: HC died; cleaning up [434913.947863] usb 3-1: USB disconnect, device number 3 [434913.949632] cp210x ttyUSB0: failed set request 0x0 status: -19 [434913.959197] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0 [434913.959273]
  11. So results for another device (cubietruck2) ... limatester worked in all tested configs. Same u-boots as tested before to be compatible in the results ... (so latest ideas from ssvb not included) tpm8-u-boot-sunxi-with-spl_20170219_432_DCDC3_13v root@cubietruck:~# a10-meminfo dram_clk = 432 mbus_clk = 300 dram_type = 3 dram_rank_num = 1 dram_chip_density = 8192 dram_io_width = 16 dram_bus_width = 32 dram_cas = 9 dram_zq = 0x7b (0x5294a00) dram_odt_en = 0 dram_tpr0 = 0x42d899b7 dram_
  12. Further infos on my problematicdevice: RAM-chips are from SKhynix I will start further testing with a mainly well working device today and will also send the RAM chips used there later on