noob1

  • Posts

    4
  • Joined

  • Last visited

noob1's Achievements

  1. nevermind found tritim h3 board iamge that works fine
  2. i have orange pi mini 2 board that fails to go past uboot. i used buster and focal images from here. here is the uboot snippet: U-Boot SPL 2021.04-armbian (May 06 2021 - 18:16:10 +0000) DRAM: 1024 MiB Trying to boot from MMC1 U-Boot 2021.04-armbian (May 06 2021 - 18:16:10 +0000) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi 2 DRAM: 1 GiB MMC: mmc@1c0f000: 0, mmc@1c10000: 1 Loading Environment from FAT... Card did not respond to voltage select! : -110 In: serial@1c28000 Out: serial@1c28000 Err: serial@1c28000 Net: phy interface0 eth0: ethernet@1c30000 starting USB... Bus usb@1c1b000: nothing happens after this. i have tried with different sd cards with same results. so i have a few quesions: is the board damaged? or i have used the wrong image or is there some wrong configurations as the image and boards aren't exactly identical.
  3. Armbianmonitor: http://ix.io/2ksk i too have the same problem of unmet dependencies, i did apt install wireguard-tools modprobe wireguard i also tried to do apt install wireguard-tools=1.0.20200319 to resolve the dependency but this command fails with no such version found. apt install wireguard still fails citing wireguard-tools version required is >=1.0.20200319 but 0.0.2201912 is to be installed. please guide me in correct direction.