Ngo Thang

  • Content Count

  • Joined

  • Last visited

Everything posted by Ngo Thang

  1. Could you please explain why do you use 6330 instead of 4330 ? And what is about your tvbox now, can you fix and boot again ? Tks
  2. back to Wifi issue, when I run command "ip a", I see this result # ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether xx:yy:1c:a0:ee:a2 brd ff:ff:ff:ff:ff:ff inet 192.168.1.XX/24 brd scope global
  3. As I said above, my TX3 mini runs with Armbian successfully but it can not use Wifi, Bluetooth and Audio jack out. What a pity !
  4. I tried both DTB files, they are OK. I don't see the difference in screen, OS, interface,... when I use each of them
  5. Hi robertoenr It's simple like that. Follow guide of SteeMan, but NO NEED to hold Reset while booting, DO NOT PRESS OR HOLD ANYTHING while booting and DO NOT plug USB Keyboard while booting, you can plug USB Keyboard later, after see login screen
  6. Now I can boot into Armbian, I find out an interesting way. If I unplug USB keyboard, it can boot from SDCard or USB into Armbian without pressing reset button, after it comes to login screen, I plug USB keyboard and I can use it normally. But if I plug USB keyboard while booting, it shows error "Unexpected XHCI event TRB,..." and reboot forever
  7. I think I did correctly with Etcher to flash to my SDCard. Just cause by my TX3 mini does not use Stock Rom when I buy it, the buyer already changes to Cook Rom. It may prevent to multiboot. Now I am trying to flash to Stock Rom
  8. Sorry. I try again and it's difference. I plug only USB (no SDCard) and no need to hold reset, it still boots into text screen and restarts forever as my video clip above, it shows error "Unexpected XHCI event TRB,..." Tks
  9. It's stranger like that: If I boot into Android, I can read content in my SDCard and my USB that mean SDCard slot and USB slot are OK. I flash both my SDCard and my USB with file I plug only SDCard and hold reset -> it shows recovery screen I plug only USB and hold reset -> it shows recovery screen I plug both SDCard and USB, even I hold reset or do nothing, it boots into text screen but after restarts and boots into text screen again and restarts again and again. Let see m
  10. I already copy u-boot-s905x-s912 to u-boot.ext My android box boots successfully to android TV screen without SDCard I've never tried other software before Tks
  11. Hi SteeMan Thank you for your very detail guideline. I follow but still get a problem I download image, flash to SDCard via balenaEtcher, edit /boot/extlinux/extlinux.conf with correct DTB parameter I push SDCard into, hold reset and power on, but my TX3 mini always shows the screen as in picture, as far as I understand it is recovery screen It can't boot into armbian in SDCard Best regards
  12. I want to use TX3 mini to install HASS for smart home. I'm in normal level of linux, I can do with debian, ubuntu, centos, I already install HASS in Raspberry Pi before Tks
  13. Hi SteeMan I'm newbie, it's quite difficult for me to clearly understand the fisrt post of that thread, there are also so much comments in that thread. I don't know which image file should I download and how to do with uboot file. Could you please share your experience. Thanks and best reagds
  14. Hi all. I'm newbie. I have a TX3 mini, I read some guides to download image and flash to SD Card to run Armbian in TX3 mini. But there are no suitable image file for S905x Soc in these URLs So please share me link to download this image file Thanks so much