Jump to content

HoSe_Colonia

Members
  • Posts

    2
  • Joined

Reputation Activity

  1. Like
    HoSe_Colonia got a reaction from Werner in NanoPi R4S   
    Confirmed:
     
    Armbian 21.02.0-trunk Focal with Linux 5.9.16-rockchip64
     
    The one in the middle works:
     
    [ 922.891909] usb 6-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd [ 922.913139] usb 6-1: New USB device found, idVendor=090c, idProduct=2000, bcdDevice=11.00 [ 922.913162] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 922.913178] usb 6-1: Product: Intenso Flash Line [ 922.913193] usb 6-1: Manufacturer: SMI Corporation [ 922.915257] usb-storage 6-1:1.0: USB Mass Storage device detected [ 922.917468] scsi host0: usb-storage 6-1:1.0 [ 922.969173] usbcore: registered new interface driver uas [ 924.022772] scsi 0:0:0:0: Direct-Access Intenso Flash Line 1100 PQ: 0 ANSI: 6 [ 924.024647] sd 0:0:0:0: [sda] 245760000 512-byte logical blocks: (126 GB/117 GiB) [ 924.025007] sd 0:0:0:0: [sda] Write Protect is off [ 924.025029] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00 [ 924.025382] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 924.033101] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 924.058523] sda: sda1 sda2 sda3 [ 924.060440] sd 0:0:0:0: [sda] Attached SCSI removable disk  
    The left one (corner) does not:
     
    [ 463.509617] usb 6-1: USB disconnect, device number 2 [ 463.515097] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 463.515366] sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=0x01 driverbyte=0x00  
     
     
     
  2. Like
    HoSe_Colonia reacted to Werner in NanoPi R4S   
    Board does now properly boot on current and dev branch.
×
×
  • Create New...

Important Information

Terms of Use - Privacy Policy - Guidelines