peppezic

Hi SteeMan, my USB adapter is working fine and I'm running armbian quite fine Thanks again.

Ok SteeMan. Thanks for your support. I'll try to use some old USB Realtek based wifi b/g adapter and load the proper module to let them work. I let you know and thanks again for your kind support.

Hi SteeMan, I successfully installed Armbian_20.10_Arm-64_bullseye_current_5.9.0_desktop.img on my tv box. The desktop appeared with no problem. The only problem now is the wifi adapter. I started, as I used to do on x86 linux desktops, to find out my hardware with lspci but I had no output :-/ Can you share a way to handle or analyze the wifi problem on armbian?

I was using Armbian_20.10_Arm-64_bionic_current_5.9.0. By the way I solved by flashing the original firmware through USB burning tool.

Hi SteeMan. Unfortunately I could not answer before than 24h from my last message because of the forum restrictions. About your question: I just followed the thread I mentioned before. It means: I downloaded armbian bionic 20.10 from the repository linked in the thread I flashed it through balenaEtcher on my 64GB sd card. I renamed the correct e-boot-S905xxx file to e-boot.ext I edited /extlinux/extlinux.conf commented all the lines but FDT /dtb/amlogic/meson-gxl-s905x-p212.dtb and APPEND root=LABEL=ROOTFS rootflags=data=writeback rw console=ttyAML0... Then I started the android box and manually update its firmware by selecting aml_autoscript.zip from the sd card The box restarted a couple of times, then I set the root password and that's all. After a couple of failed attempts to start a desktop manager I accidentaly run the install-am.sh script which might have overridden the MBR and now I no longer can access android even with sd card removed. Regards.

Hi there, I'm very knew to this forum. Yesterday I successfully installed armbian 20.10 on my bqeel M9C MAX on sd card following this thread (https://forum.armbian.com/topic/12162-single-armbian-image-for-rk-aml-aw-aarch64-armv8/page/48/) I had no desktop manager available and tried several times to fix it by installing xfce4 and lightdm but with no success (I always had "xserverrc x not found" error). After that I accidentally run the script install-am.sh which properly completed the installation. After removing the SD and reboot I can no longer access Android :-o I surely went wrong running the script. The question is: there's any possibility to fix it and restore the access to android? Any help would be appreciated. Regards.