sanja

  • Content Count

    17
  • Joined

  • Last visited

About sanja

  • Rank
    Member

Recent Profile Visitors

752 profile views
  1. Thanks! Note to others who may have encountered the same issue: (Assuming that you have connected to OPi Zero via USB-TTL converter and have no LAN/WLAN connectivity) Save deb packages obtained from https://packages.debian.org/buster/armhf/iwd/download and https://packages.debian.org/buster/armhf/libell0/download to usb flash. Plug that flash into Pi Zero, mount with the command mount /dev/sda1 /some/empty/dir cd /some/empty/dir dpkg - i libell*.deb dpkg -i iwd*.deb Reboot and run nmtui-connect as usual to see the list of WiFi ne
  2. @yoq, could you please provide a summary of what needs to be done to enable WiFi connectivity in OPi Zero with Buster? Thanks in advance.
  3. Well, my intention was to use Debian Buster, but its wifi connectivity is broken, so I had to start shopping around.
  4. To double-check, wiped the SD card and burned the image again. On fresh system: Welcome to Armbian Disco with Linux 5.3.9-sunxi System load: 0.00 0.11 0.10 Up time: 8 min Memory usage: 15 % of 491MB IP: CPU temp: 66°C Usage of /: 6% of 15G root@orangepizero:~# ls -la /usr/lib/python3/dist-packages/CommandNotFound total 40 drwxr-xr-x 4 root root 4096 Nov 1 09:35 . drwxr-xr-x 14 root root 4096 Nov 1 09:34 .. -rw-r--r-- 1 root root 16319 May 4 2018 CommandNotFound.py drwxr-xr-x 3 root root 4096 Nov 1 09:35 db -rw-r--r--
  5. Re-installed Disco, wireless connectivity worked, but apt-get update produces error. Checking: root@orangepizero:~# cd /usr/lib root@orangepizero:/usr/lib# ls -l cnf* -rwxr-xr-x 1 root root 684 Nov 9 2018 cnf-update-db root@orangepizero:/usr/lib# find / -name *creator* /usr/lib/python3/dist-packages/CommandNotFound/db/creator.py /usr/lib/python3/dist-packages/CommandNotFound/db/__pycache__/creator.cpython-37.pyc root@orangepizero:/usr/lib# cp -r /usr/share/command-not-found/CommandNotFound /usr/lib/python3/dist-packages/ cp: cannot stat '/usr/share/command-not-found/CommandNotFoun
  6. I will check in a moment. Currently trying other distributions. Found out that there is no wireless connectivity on Armbian_19.11.3_Orangepizero_buster_current_5.3.9 (nmtui-connect only displays "Wired connection 1"). root@orangepizero:~# ip link 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 2a:d0:11:70:4e:02 brd ff:ff:ff:ff:ff:ff 3: eth0: <NO
  7. No, I tried that - it didn't resolve the issue. I also considered a theory that an upgrade messed python 2.7 and 3.6 - didn't solve my problem as well.
  8. Hi. I've upgraded Buinic to Eoan and encountered an error with apt-get. Decided to have a fresh install of Disco from https://dl.armbian.com/orangepizero/ and got exact same error. I did nothing with the installation except that I've configured WiFi with ntmui-connect command. So I guess this is some issue with Ubuntu releases 19.xx root@orangepizero:~# apt-get update && apt-get upgrade Hit:1 http://ports.ubuntu.com disco InRelease Hit:2 http://ports.ubuntu.com disco-security InRelease Hit:3 http://ports.ubuntu.com disco-updates InRelease Hit:5 http://ports.ubuntu.com di
  9. Hi. I am having this issue with Orange PI PC. If it boots up when the TV it connects to over HDMI is off, I am getting blank pink screen. I guess it is because it chooses different video output when TV isn't detected. Raspbian forums suggest disabling "HDMI hotplug" by editing /boot/config.txt , but Armbian hasn't got this file. Please share your suggestions as this TV is on the wall in my kid's school at 2m height - and if it reboots due to short power failure, it needs a ladder to get fixed. Please help me before school year starts
  10. I checked out the sources from git on Sept 21st and compiled Debian and Ubuntu desktop versions myself in Ubuntu VM. The problem is that Debian desktop version works beautifully from the box with Ralink MT7601U, but Ubuntu does not. It does nothing when I try to open network manager and "ifconfig" doesn't list "ra0" adapter. Please tell me what additional information I should provide to help debugging it.
  11. FYI, the Debian server variant I've built from sources works with this WiFi dongle "out of the box". But Ubuntu desktop does not - 'ifconfig' doesn't list 'ra0' adapter at all.
  12. I have downloaded the sources from git and compiled them on the Ubuntu virtual machine, as advised. I've built Debian desktop version. WiFi works nicely from the box - all I had to do was to provide WiFi password from GUI.
  13. You are asking too much of a Windows guy And the last time I've made a pull req to GitHub was a while ago. But I will give it a try.
  14. Good point, I didn't pay attention to date of the MediaTek's sources. In your estimates, when the new binary distribution of Armbian will be released? (I.e. will it make sense to take the trouble to get virtual machine with build environment up and running or just wait a bit?)