erturk47

Hi, I have problems from booting emmc of my 4/64GB radxa zero. I want to make fresh install and cleaned emmc completely. By following radxa guide, I flashed latest Armbian_24.8.1_Radxa-zero_noble_current_6.6.47.img.xz image from official site. But booting failing. I attached serial monitor and saved output. Boot process stops at line 215 and If I give "boot" command, It starts booting from emmc with same warnings. I'm attaching full log. By the way, I tried updating bootloader by using armbian-config utility but nothing changed. radxa_zero_serial.log

I found a bug. I cant change min CPU frequency. I tried armbian-config and cpufreq-set on Armbian Jammy current (kernel 6.1.4) on Radxa Zero (4-64GB). Min frequency set 100MHz. I want to increase 500MHz.

Hi everyone, I'm using Radxa Zero HW version 1.4, 4GB RAM with 64GB eMMC. I used long time armbian on SD card. I decided to install MMC for better performance but armbian crashes APT involving stuffs. By the way, I'm using Rzero with headless and connecting via SSH from Win11 machine. I installed with producer tools directly writing image to MMC and alternatively installed with armbian-config tool from SD card to MMC. In both way successfully boots and connects Wi-Fi. For better diagnostic, how can I get error dump? (I lost SSH connection when its crushed).

Hi everyone, I have Radxa Zero 4GB-64GeMMC model. I'm using latest Armbian (22.05.3) on microSD card. I want to connect my portable SSD (500GB) to RZ with USB3.0 hub that has additional power imput to support energy hungry devices. I checked usb hub is working with 16GB usb flash. My ssd use realtek RTL9210 chip. I also get similar problem with 32gb mSD card formatted with FAT32. When I connected the SD card reader, other device that uses same hub become slaggish and do not working properly. If I unplag sd card or ssd everything back normal. I thing there is a driver problem. Radxa Zero Diagnostic Dump