b-baka

How did you removed SDcard/USB incompactible warning in status bar(that asking to format disk)?

Thank you! PCIE M2 SATA work great after adding overlay you mentioned! There is also new case https://aliexpress.ru/item/1005005115126370.html I think it'll have much better temeratures than acrylic.

Finally managed to boot from PCIE M2 SATA(not NVME) without SDcard on orangepi images: 1. Boot from sdcard 2. sudo dd if=/usr/share/orangepi5/rkspi_loader_sata.img of=/dev/mtdblock0 && sudo sync 3. Add overlays=ssd-sata to file /boot/orangepiEnv.txt 4. Reboot 5. Now your disk should be detected as sda(not nvme0n1) in fdisk -l, lsblk, etc 6. Copy orangepi image that you used on sdcard to sbc via rsync/scp 7. sudo dd bs=1M if=/path/your/orangepi_linux5.10.110.img of=/dev/sda status=progress && sudo sync 8. Mount /boot/ from new disk: sudo mount /dev/sda1 /mnt/ 9. Add overlays=ssd-sata to file /mnt/orangepiEnv.txt 10. sudo umount /mnt/ && sudo sync 11. poweroff 12. remove SDcard and start SBC Now you should boot from your PCIE M2 SATA disk: orangepi@orangepi5:~$ lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS sda 8:0 0 476.9G 0 disk ├─sda1 8:1 0 256M 0 part /boot └─sda2 8:2 0 471.9G 0 part /var/log.hdd / mtdblock0 31:0 0 16M 0 disk zram0 254:0 0 3.8G 0 disk [SWAP] zram1 254:1 0 200M 0 disk /var/log orangepi@orangepi5:~$ fdisk -l Disk /dev/ram0: 4 MiB, 4194304 bytes, 8192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/zram0: 3.75 GiB, 4031504384 bytes, 984254 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk /dev/mtdblock0: 16 MiB, 16777216 bytes, 32768 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: C07C704A-CF6D-4888-9D60-DC9506262463 Device Start End Sectors Size Type /dev/mtdblock0p1 64 7167 7104 3.5M Linux filesystem /dev/mtdblock0p2 7168 7679 512 256K Linux filesystem /dev/mtdblock0p3 7680 8063 384 192K Linux filesystem /dev/mtdblock0p4 8064 8127 64 32K Linux filesystem /dev/mtdblock0p5 8128 8191 64 32K Linux filesystem /dev/mtdblock0p6 8192 16383 8192 4M Linux filesystem /dev/mtdblock0p7 16384 32734 16351 8M Linux filesystem Disk /dev/sda: 476.94 GiB, 512110190592 bytes, 1000215216 sectors Disk model: TS512GMTS430S Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: 58FCCC02-859A-5041-ADA7-14802AADF341 Device Start End Sectors Size Type /dev/sda1 61440 585727 524288 256M Linux extended boot /dev/sda2 585728 990183423 989597696 471.9G Linux filesystem Disk /dev/zram1: 200 MiB, 209715200 bytes, 51200 sectors Units: sectors of 1 * 4096 = 4096 bytes Sector size (logical/physical): 4096 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes orangepi@orangepi5:~$ sudo smartctl -a /dev/sda smartctl 7.2 2020-12-30 r5155 [aarch64-linux-5.10.110-rockchip-rk3588] (local build) Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Silicon Motion based SSDs Device Model: TS512GMTS430S Serial Number: G769530482 LU WWN Device Id: 5 7c3548 1cf19a072 Firmware Version: R0427GN1 User Capacity: 512,110,190,592 bytes [512 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: M.2 TRIM Command: Available, deterministic, zeroed Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-3 T13/2161-D revision 5 SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun Jan 8 15:38:24 2023 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was never started. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0002) Does not save SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0000 100 100 000 Old_age Offline - 0 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 5 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 26 148 Total_SLC_Erase_Ct 0x0000 100 100 000 Old_age Offline - 7 149 Max_SLC_Erase_Ct 0x0000 100 100 000 Old_age Offline - 1 150 Min_SLC_Erase_Ct 0x0000 100 100 000 Old_age Offline - 0 151 Average_SLC_Erase_Ct 0x0000 100 100 000 Old_age Offline - 0 159 DRAM_1_Bit_Error_Count 0x0000 100 100 000 Old_age Offline - 0 160 Uncorrectable_Error_Cnt 0x0000 100 100 000 Old_age Offline - 0 161 Valid_Spare_Block_Cnt 0x0000 100 100 000 Old_age Offline - 29 163 Initial_Bad_Block_Count 0x0000 100 100 000 Old_age Offline - 29 164 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 141 165 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 2 166 Min_Erase_Count 0x0000 100 100 000 Old_age Offline - 0 167 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 0 168 Max_Erase_Count_of_Spec 0x0000 100 100 000 Old_age Offline - 1000 169 Remaining_Lifetime_Perc 0x0000 100 100 000 Old_age Offline - 100 177 Wear_Leveling_Count 0x0000 100 100 050 Old_age Offline - 0 181 Program_Fail_Cnt_Total 0x0000 100 100 000 Old_age Offline - 0 182 Erase_Fail_Count_Total 0x0000 100 100 000 Old_age Offline - 0 192 Power-Off_Retract_Count 0x0000 100 100 000 Old_age Offline - 5 194 Temperature_Celsius 0x0000 100 100 000 Old_age Offline - 37 195 Hardware_ECC_Recovered 0x0000 100 100 000 Old_age Offline - 0 196 Reallocated_Event_Count 0x0000 100 100 016 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 100 100 050 Old_age Offline - 0 232 Available_Reservd_Space 0x0000 100 100 000 Old_age Offline - 100 241 Host_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 1378 242 Host_Reads_32MiB 0x0000 100 100 000 Old_age Offline - 197 245 TLC_Writes_32MiB 0x0000 100 100 000 Old_age Offline - 5076 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Completed [00% left] (0-65535) Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. On armbian PCIE M2 SATA SSD doesn't work. @Efe Çetin can you please add this patch https://github.com/armbian/build/issues/4655 ?

My SATA SSD still doesn't work after these steps: orangepi@orangepi5:$ dmesg | grep pci [ 5.517433] reg-fixed-voltage vcc3v3-pcie2x1l2: Looking up vin-supply from device tree [ 5.517493] vcc3v3_pcie2x1l2: supplied by vcc5v0_sys [ 5.574978] vcc3v3_pcie2x1l2: 1800 mV, enabled [ 5.575052] reg-fixed-voltage vcc3v3-pcie2x1l2: vcc3v3_pcie2x1l2 supplying 1800000uV [ 6.297427] rk-pcie fe190000.pcie: invalid prsnt-gpios property in node [ 6.297438] rk-pcie fe190000.pcie: Looking up vpcie3v3-supply from device tree [ 6.298122] rk-pcie fe190000.pcie: missing legacy IRQ resource [ 6.298140] rk-pcie fe190000.pcie: IRQ msi not found [ 6.298146] rk-pcie fe190000.pcie: use outband MSI support [ 6.298152] rk-pcie fe190000.pcie: Missing *config* reg space [ 6.298173] rk-pcie fe190000.pcie: host bridge /pcie@fe190000 ranges: [ 6.298205] rk-pcie fe190000.pcie: err 0x00f4000000..0x00f40fffff -> 0x00f4000000 [ 6.298222] rk-pcie fe190000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000 [ 6.298242] rk-pcie fe190000.pcie: MEM 0x00f4200000..0x00f4ffffff -> 0x00f4200000 [ 6.298255] rk-pcie fe190000.pcie: MEM 0x0a00000000..0x0a3fffffff -> 0x0a00000000 [ 6.298289] rk-pcie fe190000.pcie: Missing *config* reg space [ 6.298319] rk-pcie fe190000.pcie: invalid resource [ 6.504341] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x2 [ 6.529881] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x2 [ 6.556554] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x2 [ 6.583214] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x2 [ 6.609879] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x2 [ 6.636549] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x2 [ 6.663215] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x2 [ 6.689880] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x2 [ 6.716548] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x2 [ 6.743214] rk-pcie fe190000.pcie: PCIe Linking... LTSSM is 0x2 [ 6.980685] ehci-pci: EHCI PCI platform driver [ 7.787429] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up pcie-supply from device tree [ 7.787466] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up pcie-supply property in node /power-management@fd8d8000/power-controller failed [ 9.183383] rk-pcie fe190000.pcie: PCIe Link Fail [ 9.183400] rk-pcie fe190000.pcie: failed to initialize host