BliteKnight

Hello, I stumbled on this thread because I have the LG642 chip and was able to get Wifi working using the patch and provided drivers earlier, but for some reason my bluetooth does not work and the chip is not found. I checked dmesg and it finds the drivers for wifi, just bluetooth is not working. Any thoughts? dmesg below

@Dougieee - can you provide you DTB files that you are using to boot as I can't find one that works.

For anyone coming to this post facing the same issue - I solved my problem. Following the guide here: https://forum.inovato.com/post/building-armbian-from-source-12449428?pid=1333459893 I was able to build the latest from trunk - Armbian_23.02.0-trunk_Aw-h6-tv_bullseye_current_5.15.91 which I was able to boot from an SD card and then write to the boards emmc The guide applies some patches to the build process - one of which is an emmc patch, which I'm going to assume fixed the issue. It took 4+ hrs to build the image on a single core linux VM, so if you are going to attempt this just know it will take that long to make the image.

Hello, I have been looking for a cheap linux box and stumbled upon the T95mini, this forum and many other blog sites. I know TV Boxes especially Allwinner based ones are not supported and a lone member of this community (and maybe others) have brought them along to where they are now. My question is, I happen to have a T95mini with a 16GB emmc that boots just fine from the SD card, but when I try to run the nand-sata-install script, it is not detecting my emmc module. The section of the script that checks for the module only finds the sd card /dev/mcblk0 /dev/mmcblk0p1 I opened it up to make sure there was an emmc module in there and there was A close up shows its a samsung klmag2geac (16GB Emmc) So my question is, I know hardware components change which is why most TV boxes are not supported - but how would I go about get this version of balbes150 armbian image Armbian_21.11.0-trunk_Aw-h6-tv_bullseye_current_5.10.68.img to detect the emmc? Do I need to modify the device tree to make that happen and if so what information would I be looking for. Thanks for any help.