Hello,
I have been looking for a cheap linux box and stumbled upon the T95mini, this forum and many other blog sites. I know TV Boxes especially Allwinner based ones are not supported and a lone member of this community (and maybe others) have brought them along to where they are now.
My question is, I happen to have a T95mini with a 16GB emmc that boots just fine from the SD card, but when I try to run the nand-sata-install script, it is not detecting my emmc module. The section of the script that checks for the module only finds the sd card /dev/mcblk0 /dev/mmcblk0p1
I opened it up to make sure there was an emmc module in there and there was
A close up shows its a samsung klmag2geac (16GB Emmc)
So my question is, I know hardware components change which is why most TV boxes are not supported - but how would I go about get this version of balbes150 armbian image
Armbian_21.11.0-trunk_Aw-h6-tv_bullseye_current_5.10.68.img
to detect the emmc? Do I need to modify the device tree to make that happen and if so what information would I be looking for.
Thanks for any help.